Ceiling modern to 3 strip, lamp LED for living room, room to bed, Restaurant, hot, AC85-265V

Features:

1. Ceiling to LED, the housing uses a material in iron + aluminum + silicone, with a color bright and a good texture.

2. Design of shape unique, suitable to the restaurant, to the desk, to the room to bed, to the coffee and to other places.

3. energy saving, high brightness, low declin of the light, not of stroboscope visible, large area illumination.

4. sturdy and durable, long service life, easy to assemble and to install, perfect for lighting interior.

5. Design of style nordique modern, execution exquisite, suitable to the decoration of the home.

Specifications:

Item Type : Ceiling

Material : Iron + Aluminum + Silicone

Weight : Approx. 514 g / 18,1 oz

Objective : lighting household

Width combined : approx. 45 cm / 17,7 inches

Height combined : approx. 6 cm / 2,4 inches

Voltage input : AC85-265V

Number of LED : 35 LED for a notule strip, 105 LED to the total for 3 strip

Power : 20 W

Brightness : 2500LM

Light Color : Light hot

Color of the housing : Silver

Area illumination : 10-25㎡

service life : 50 000 H

How to Use: 1. Install the bracket of base. Unscrew first the frame of fastening of the base of the bracket of lamp, then use the tube of screw trombone and the screw for install the frame of fastening of the base to the ceiling. 2. Install the lamp and the wire of ground. The screw on the tube of the lamp passes to through the small hole of the bracket of lamp and is fixed with a seal and a nut. The wire of ground is installed with perpendiculaires tubes of lamp. 3. Fit the shape of the tube of the lamp. 4. Install the wiring. Connect the wiring of the tube of lamp and of adapter sector in recoller, and connect the connector male to the connector female in recoller. 5. Install the power cord. Cut first power supply, then connect other end of adapter sector to power supply, the voltage is of 85 to 265 V THIS. 6. Fixed finally the product, use the screw devissees on the base, to through the small holes of the base, and tighten the frame of fastening of the base. 7. Completed installation, on power supply electric and on the lights (for didacticiels graphiques detailles, please you refer to the manual).

Package List:

3 x tube of lamp 1 x adapter sector 1 x foot of lamp 1 x manual 1 x key< /p> 3 x seal of screw 4 x cap to screw 1 x kit installation (2 x screw pointues, 2 x tube trombone to screw) >1 x wire of ground yellow

Note:

1. Please allow a error of 0 to 1 inch due to the measurement manual. Thank you of your understanding.2. The monitors are not calibrated of the same way, the color of the item displayed on the photos can be slightly different of item actual. Please take the really in standard.