Circuit Tester, Wire Tracer and Tone Generator, RJ-11 Network Cable Tester, Wire and Cable Locator, Circuit Continuity Tester

【Function】: A 100% brand new, high-quality cable tester that can help you find and trace buried and hidden wires. Perfect for installing, troubleshooting, and maintaining telephone lines and other wires or cables. 【Doesn't Damage Insulation】: The cable tracer consists of a transmitter and a receiver. It detects the continuity of cables or wires without damaging the insulation, traces cables or wires, and diagnoses breaks. 【Network Cable Check】: Receive audio signals through cables or wires (telephone lines). Identify the status of the telephone line (idle, ringing, off-hook). No need to call or spend more; you can do it yourself and repair it.

【Easy to carry】: It can be reused and is durable. Comes with a bag, which can be stored well, avoiding dust and collision. Cable tracker small, lightweight, easy to carry.

【Package includes】: 1 transmitter, 1 receiver, 1 test cable, 1 carrying case and 1 manual (without battery).

Circuit Tester, Cable Tracer and Tone Generator, RJ-11 Connector for Network Cable Tester, Cables and Cables

This wire tracer and circuit tester - including a tone transmitter/generator and detector - is designed to identify and trace any wire or cable without damaging the insulation.

Versatile

A brand new, high quality wire tester to help you find and trace buried and hidden wires. No need to call or spend more, you can find and repair it yourself.

Safety first

Check if the cable connection is continuous. Trace cables or wires and diagnose breaks. Detects cable crossings without damaging the insulation. Easy to carry Small, lightweight, easy to carry, long lifespan, low power consumption, compact and safe. It can be reused and is durable. Comes with a bag for neat storage, preventing dust and impacts. Instructions for use Wire tracing probe The probe can record a sound without touching the wire. It can audibly identify the selected wire or cable. Depending on the circuit characteristics and sensitivity settings, the probe picks up the wire signal at different positions. However, to obtain the best possible range, the probe tip of the receiver (black cap) must be positioned perpendicular (at a 90° angle) to the cable being traced and either above or below it.

LED indicator

In CONT mode, it is possible to check that the electrical circuit is not short-circuited or interrupted. The supplied RJ11 connector allows you to easily test your telephone system (in CONT mode, you must use two alligator clips). In CONT mode, connect two clips to each end of the circuit wire. In TONE mode, you can quickly track cables running through ceilings, under floors, interior wall barriers, and more. without worrying about not knowing the exact location of the cable (in TONE mode, only one alligator clip should be used). In TONE mode, connect the red clip to the cable and the black clip to ground, then follow the cable to the disconnected position. If the red light comes on, it indicates that the cable is shorted or broken.

Scope of delivery:

1 x transmitter cable

1 x receiver cable

1 x RJ11 cable

1 x Carrying Bag 1 x Instruction Manual Wide Application: Cyber ​​Cafe Hotel Network Room Electrical Repair Surveillance System Network Line Technology Easy to Install Simply insert two 9V batteries into the back of the product to use it. NOTE: Batteries are not included. Alligator Clips Two alligator clips are used to connect the cable. Before checking the circuit, the power supply must be turned off to avoid any risk of electric shock. RJ-11 Connector The RJ-11 connector is used to identify the status of the telephone line (Clear, Ring, Busy). Multifunctional Wire and Cable Detector -Perfect for installing, troubleshooting, and maintaining telephone lines and other wires or cables. -Detect the continuity of cables or wires without damaging the insulation. -Verify if the cable connection is continuous. -Trace the cables or wires and diagnose the point of breakage. -Receive the audio signal on the cables or wires (telephone line). -Identify the telephone line's state of operation (idle, ringing, off-hook). -Send a single or dual audio signal to the cables or wires of the object. Note: The line being tested must not be in an electrical state, otherwise signal interference will affect the detection results.