Coating Thickness Gauge, GM200A 01.80mm Professional Automotive Paint Coating Thickness Tester for Car and Industrial Applications

Specification: Item Type: Coating Thickness Gauge Material: Plastic + Electronic Components Target Measurement: Non-metallic coating thickness on a metallic surface Measuring Range: 0 ~ 1.80 mm / 0 ~ 71.0 mil non-metallic coating on a metallic surface Accuracy: ± 0.1 mm Power Supply: 2 AAA batteries (not included) Minimum Base Diameter: 50 mm Critical Base Thickness: 0.5 mm Display Resolution: 0.01 mm / 1 mil Operating Temperature: 0 ~ 40 °C Operating Humidity: 10 ~ 95% RH Product Size: Approx. 6.2 x 3.5 x 10.5 cm / 2.4 x 1.4 x 4.1 inches (± 1 to 2 cm) Package List: 1 x Thickness Gauge 1 x Pillar 1 x Manual 6 x Coating Thickness Films

【Car Mode】 Since the GM200A vehicle model has built-in data, the user cannot perform calibration. In car mode, it can directly measure the coating thickness of iron, aluminum and aluminum substrates. zinc, suitable for measuring the coating thickness of automobiles. Pacifier Clip Chain for Baby.

【User Mode】 In GM200A user mode, after calibrating the metal substrate, the user can only measure the coating thickness of this metal surface, but not other metals. For example, if you calibrate a substrate in iron, you cannot measure the coating thickness of an aluminum substrate.

【User Model Calibration】 According to the user model calibration, the diameter of the GM200A substrate should be ≥50mm and the thickness of the substrate should be ≥0.5mm. The critical thickness of GM200A relative to the base metal (≥0.5mm).

【Measurement Configuration】 The GM200A's user mode calibration will not affect the vehicle mode. The GM200A's vehicle mode is the default factory setting. The GM200A's default factory setting uses an iron substrate to calibrate the model. user. 【Edge Effect】 The GM200A is sensitive to sudden changes in the shape of the sample surface. Therefore, it is unreliable to measure near the edge or inside corner of the object being measured. The GM200A can only measure non-metallic coatings.