1/4
Black folding shower barrier with retaining system to hold water inside the threshold.
Of which environmental contribution £0.10 including VAT.
Sold by Permu UK
You may also like
Compare with similar items
Product information
Description
Description
Barrier dimensions: 100 x 3 x 5 cm. It can be easily cut to the length you need.
The long, flexible design creates a variety of shapes.
Shower barriers and retention systems keep water within the threshold.
Ideal for overflow showers and other areas that need to retain water.
If you have any questions about the collapsible barrier, please contact us.
Customer note: To make the product more stable, please follow the installation instructions to install the water retention strip.
Installation steps and precautions:
(1) First, please thoroughly clean the floor and keep it dry. This step is very important!
(2) Next, determine the installation position of the water-retaining strip, then make a mark on the floor with a pen.
(3) Peel off the adhesive backing from the water-retaining strip and stick it to the floor in the position indicated earlier.
(4) Then, fill the area where the two ends of the strip will be in contact with the wall with adhesive, seal it, and remove any excess adhesive to ensure a smooth bond.
(5) Finally, to prevent it from falling off, please allow it to dry completely within 24 hours and avoid any contact with water.
Barrier dimensions: 100 x 3 x 5 cm. It can be easily cut to the length you need.
The long, flexible design creates a variety of shapes.
Shower barriers and retention systems keep water within the threshold.
Ideal for overflow showers and other areas that need to retain water.
If you have any questions about the collapsible barrier, please contact us.
Customer note: To make the product more stable, please follow the installation instructions to install the water retention strip.
Installation steps and precautions:
(1) First, please thoroughly clean the floor and keep it dry. This step is very important!
(2) Next, determine the installation position of the water-retaining strip, then make a mark on the floor with a pen.
(3) Peel off the adhesive backing from the water-retaining strip and stick it to the floor in the position indicated earlier.
(4) Then, fill the area where the two ends of the strip will be in contact with the wall with adhesive, seal it, and remove any excess adhesive to ensure a smooth bond.
(5) Finally, to prevent it from falling off, please allow it to dry completely within 24 hours and avoid any contact with water.
Features
- BrandKZQ
- Length100 cm
- Width3 cm
- Height5 cm
- Weight420 g
Advice from
Shower tray buying guide
Shower trays are an essential part of bathroom design. Walk in or low profile trays are enclosed by a shower screen and/or door and equipped with a shower head, hose and riser rail kit. By contrast, wet room trays are installed with an overhead shower head and form the base of a walk in shower. Read on to find the right shower tray for you.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}