1/4
You may also like
Compare with similar items
Product information
Description
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended.
Should not be used for extensive periods or heavy work.
The TRE63127 Collet Sleeve has the following specifications:
Diameter: 12.7mm (1/2in)
Internal Bore 6.35mm (1/4in)
Bore: 8mm.
Overall length: 30mm.
Features
- BrandTREND
- Width11 mm
- Diameter12.7 mm
- MaterialMetal
- Router and jointer accessory typeAdapter
Advice from
Drill buying guide
From hammer drills to drill drivers, your choice of drill will come down to the type of tasks you want to complete. For example, a cordless drill is better for driving screws while a corded drill is best suited to drilling. Read on for our tips on picking the right torque, RPM, impact rate, battery and chuck type.
'/%3E%3C/svg%3E)
You are here:
Related categories
Trend router bits
Palm router
Dewalt router
Makita router case
Makita router guide rail
Forstner bit
Forstner bit set
Angle cutter
Hinge jig
Torx bit
Festool router
Wood trimmer
Dewalt router guide rail
Hinge drill bit
Door jig
Wood cutter
Trend 3/08X1/2TC 3/08 x 1/2 Shank TCT Two Flute Cutter 12.7 x 25mm Router Bit
Trend C079X1/2TC Rounding Over 1/2 Cutter 12.7mm Radius X 19.1mm Cut Router Bit
Trend C021X1/4TC 1/4 Two Flute TCT Cutter 12.7mm x 25mm Carbide Router Bit
Trend C075X1/4TC Guided Rounding Over 1/4 4.8mm X 12mm Router Bit Cutter
Trend 3/86CX1/2TC Two Flute Router Bit 12.7mm Dia X 75mm Router Cutter
Trend 3/5X1/2TC 1/2 Shank Two Flute Cutter 9mm x 19mm Router Bit
'/%3E%3C/svg%3E){kind=small}