Compatible with Kawasaki ZX600, ZX636, ZX-6RR 2005-2006 motorcycles, ignition stator coil, magneto coil, specifically for superbikes.--DTEKGAZ

The GOOFIT high-performance ignition coil (magneto ignition) was specifically developed for Kawasaki ZX series supersport motorcycles. Designed and manufactured to the specifications of the 2005-2006 Kawasaki ZX600 (599cc), ZX636 (636cc), and ZX-6RR (racing version), this product ensures perfect compatibility with the original electrical system. The ignition coil combines ignition signal generation and power supply, utilizes racing-grade materials, and features enhanced insulation. This allows it to withstand extreme operating temperatures and high-speed vibrations. It effectively addresses issues such as high-rev misfires, charging problems, idle vibrations, and general electrical system failures due to stator aging, thus optimizing your motorcycle's performance on both the road and the track. 【Key Features】 • Guaranteed Compatibility: Specifically designed for the 2005 and 2006 Kawasaki ZX600, ZX636, and ZX-6RR models for a perfect fit. • Reinforced, Competition-Grade Design: High-temperature resistant insulating materials (Class H or higher), vacuum impregnation, shock and moisture resistant. • Integrated Dual Function: Simultaneously provides precise crankshaft position/RPM signals and stable power output. • Complete Power Enhancement: Addresses common issues such as high-RPM misfiring, insufficient load, and rough idling. • Plug-and-Play Installation: Original position; no electronic calibration or wiring modifications required. 【Compatibility Information】 • Compatible Models: Kawasaki ZX600 (599 cc), ZX636 (636 cc), ZX-6RR • Compatible Years: 2005, 2006 • Important Note: Please check the year of manufacture using the 10th digit of the frame number (5 = 2005, 6 = 2006). It is recommended to remove the old parts for visual comparison. 【Installation Instructions】 Safety Precautions: Disconnect the battery and ensure the engine is cold. Professional Removal: Use a flywheel puller to remove the left magneto cover and flywheel. Parts Replacement: Remove the old stator and install the new stator coil. Precise Installation: Tighten the flywheel and side covers to the specified torque. System Testing: Connect the battery and check the charging voltage and engine speed. [Performance Test Standards] • Charging voltage: Stable between 13.8 V and 14.6 V at 3000–5000 rpm. • Idle stability: Stable idle in cold and warm conditions. • High performance: No misfires or power loss under hard acceleration. • System compatibility: No fault codes in the control unit and flawless operation of all vehicle electrical systems.