Concealed Shelf Bracket Wall Mounted Shelf Bracket Invisible Bracket 6pcs（coffee）

【Concealed Mounting Brackets】- Can be used for DIY or custom ledges, completely hidden in walls and boards, simple and fashionable, to make your home more beautiful and tidy.【Material】- The interior of the floating shelf bracket is made of iron, its casing and expansion tube are made of plastic. It is fine workmanship, sturdy and durable.【Dimensions】- The total length is 175mm, the expansion tube length is 75mm, the diameter is Ø12mm and the support rod length is 100mm, the diameter is Ø10mm.【High Stability】- The support rod is a hexagonal cylinder with barbs, which increases the obstruction of the board and improves stability.【Strong Load-Bearing】- The load-bearing capacity of the wall-mounted shelf bracket is very strong. If properly installed on a suitable fixed brick wall, the bracket can support about 20 kg. Product [Name]: Wall Mounted Concealed Nail Brackets for Floating Shelves [Material]: Metal (Iron) + Plastic [Color]: Brown [Size]: Ø10mm x 100mm [Dimension]: Total length: 175mm Expansion tube length: 75mm, diameter: Ø12mm Support rod length: 100mm, diameter: Ø10mm [Package]: 6 x Hidden Floating Shelf Brackets The Shelf Bracket can support and fix all kinds of wall shelves, such as bookcases, display shelves, garage shelves, decorative shelves, bathroom shelves, shoe racks, etc. It can definitely satisfy your various DIY wall bracket designs. Installation Steps: 1. First, measure the hole spacing and drill the hole in the wall. The hole depth should not exceed 75mm.2. Insert the expansion end of the support support pin into the wall hole, with the black screw cap at the end.3. Insert the support rod into the expansion plug of the wall hole. After the screw end is properly contacted with the screw cap and tightened clockwise, continue to turn until the expansion plug in the wall expands to fully support the wall.4. Then drill the hole of the corresponding size on the side of the board (according to the wall hole spacing).5. Finally, insert the board into the board support rods.Note:1. You need to prepare a 12mm drill bit for drilling holes in the wall and another 10mm drill bit for drilling holes in wood.2. Remember to place the central silver metal ring on one side of the expansion tube and embed it into the wall.3. Each painting must have at least 2 invisible supports and be held in the same horizontal position.