Connection Terminals, 6 Pcs Electrical Connector with Operating Lever, Compact Automatic Electrical Connection Terminal, 3 in 6 out

Easy to use: First, remove the outer sheath from the wire (9-10 mm), simply push the orange clip slightly upwards at a 90° angle, insert the cable, and turn off the switch. This eliminates the need for traditional electrical tape and staggered butt connectors. Technological innovation. Wiring time reduced by 70%. Convenient: These 3-port and 6-port wire connectors are suitable for both solid and stranded wires. You can use them to control multiple lights with a single switch (3 inputs, 6 outputs). Widely used – Universal connector: Suitable for solid wires from 0.08 to 4 mm²/28-12 AWG and stranded wires from 0.08 to 2.5 mm²/28-14 AWG. It is widely used in building wiring where space for all connections is limited. Reusable: Each connection terminal has a detection connection and can also be recycled. Each connector has an independent spring, the different wires are managed separately, and different wire diameters can be connected safely. There is a test hole on the surface of each connector. Tip: The bilateral terminals of the push rods are connected to the positive, negative, and ground terminals of the power supply, respectively. Rated current: 32 A; Rated voltage: 250 V. Note: All data is measured manually. Due to differences in lighting and display, please allow for a 1-3 cm error. Please refer to the actual item received.