Connection Terminals, 60 Clamps Electrical Connector with Operating Lever, Compact Automatic Electrical Connection Terminal, 20 Clamps 2 Ways, 30 Clamps 3 Ways, 10 Clamps 5 Ways

Safe and reliable material: These automatic connection terminals are made of insulating and flame retardant materials. The clamps are corrosion resistant, aging resistant and reusable. The inner conductor material is nickel-plated copper, has good high conductivity. Safe and reliable. Easy to use: No tools are required. First strip the cable jacket 9-10mm, Lift the lever up to 90°, insert the wire, then press the lever. Each clamp has a test hole, An electric pen can be used to check whether the terminal has power. Which makes it convenient for testing and maintenance. Universal connectors: These connection terminals are suitable for solid and twisted conductors from 0.08 to 2.5 mm² and flexible conductors from 0.08 to 4 mm². 2 holes, 3 holes, 5 holes meet different types, which is very practical, meet your different needs.Wide applications: These compact connection terminals are ideal for constructing parallel connected cables. They can be used in the home and workshop. Ideal for lighting systems, construction cables, communications systems and security alert systems. Package included: These wire connector set have total 60pcs clips, 20pcs 2 way clips, 30pcs 3 way clips, 10pcs 5 way clips.Specifications: Material: Nylon PA6.6 flame retardant insulation materials Inner conductor material: nickel-plated copper Rated voltage: 250V Rated surge voltage: 4KV Rated current: 32A Cross section (solid and stranded conductors): 0.08 - 2.5 mm² Cross section (flexible conductors): 0.08 - 4 mm² Strip length: 9 - 10 mm Wide application: These compact Connection terminal are ideal for building cables connected in parallel. Perfect for home, workshop, lighting systems, construction cables, communication systems and security alert systems. How to use: 1. Strip the cable sheath by 9 -10 mm. 2. Raise the lever 90°. 3. Insert the wires. 4. Push the lever down to close the clamps. Safety Tips: 1. Turn off the electrical power before installation so that the cables are de-energized. 2.Since the copper spring is very elastic, it should be avoided that it catches your fingers when opening and closing the orange lever switch. 3.Each clamp connection terminals has a test hole, An electric pen can be used to check whether the terminal has power. Which makes it convenient for testing and maintenance. Connection terminal set includes: 20 2-hole clamps (PCT-212: 2.1 x 1.3 x 1.5 cm) 30 3-hole clamps (PCT-213: 2.1 x 1.7 x 1.5 cm) 10 5-hole clamps (PCT-215: 2.1 x 2.7 x 1.5 cm)