Connection terminals, 60 clamps, electrical connector with operating system

Safe and reliable materials: These push-in terminals are made of insulating and flame-retardant materials. The clamps are corrosion and aging resistant, and reusable. The internal conductor is nickel-plated copper, offering excellent conductivity. Safe and reliable.

Easy to use: No tools required. First, strip 9 to 10 mm of insulation from the cable, lift the lever to 90°, insert the wire, and then press the lever. Each clamp is equipped with a test hole; a multimeter can be used to check the terminal's power supply. This simplifies testing and maintenance.

Universal connectors: These terminals are suitable for solid and twisted conductors from 0.08 to 2.5 mm² and stranded conductors from 0.08 to 4 mm².

Available in 2, 3, and 5-hole versions, they meet a variety of needs. Numerous applications: These compact terminal blocks are ideal for connecting cables in parallel. They can be used at home or in the workshop. Ideal for lighting systems, building cables, communication systems, and security alert systems.

Package Contents: This connector kit includes 60 clips, 20 two-way clamps, 30 three-way clamps, and 10 five-way clamps.

Specifications:

Material: Nylon PA6.6, flame-retardant insulating material

Inner Conductor Material: Nickel-plated copper

Rated Voltage: 250 V

Rated Surge Voltage: 4 kV

Rated Current: 32 A

Cross-Section (Rigid and Flexible Conductors): 0.08 to 2.5 mm²

Cross-Section (Flexible Conductors): 0.08 to 4 mm²

Length of Stripping: 9 to 10 mm

Numerous applications: These compact terminal blocks are ideal for parallel cable connections. Perfect for home, workshop, lighting systems, building wiring, communication systems, and alarm systems. Instructions: 1. Strip 9 to 10 mm of insulation from the cable sheath. 2. Lift the lever to 90°. 3. Insert the wires. 4. Lower the lever to close the terminal blocks. Safety instructions: 1. Disconnect the power supply before installation to de-energize the cables. 2. The copper spring is very elastic; be careful not to pinch your fingers when opening and closing the orange lever. 3. Each terminal block has a test port. A multimeter can be used to check for the presence of current. This facilitates testing and maintenance. The terminal block kit includes: 20 two-hole terminals (PCT-212: 2.1 × 1.3 × 1.5 cm) 30 three-hole terminals (PCT-213: 2.1 × 1.7 × 1.5 cm) 10 five-hole terminals (PCT-215: 2.1 × 2.7 × 1.5 cm)