Controller of temperature, with sensor of sensor, thermostat micro-computer for the hatching of the housing of the equipment

General Description

The controller of temperature Eosnow is a devices digital sophisticated designed to a wide range of applications, especially the hatching, the control of the temperature in the equipment, and the systems of air conditioning. It allows you to adjust the temperature in mode Celsius or Fahrenheit with a precision of 0,1 ℃. Its wide range of measured of -50 ℃ to 110 ℃ and its capacity to manage of temperatures high in make a choice ideal for various installations industrial.

Technical Specifications

Voltage of input : DC 12V

Range of measured of the temperature : -50 ℃ to 110 ℃

Precision of measured : 0,1 ℃

Precision of control : 0,1 ℃

Precision of the difference of return : 0,1 ℃

Rate of rafraichissement : 0,5 S

Protection against the high temperatures : 0-110 ℃

Sensor : waterproof NTC (10K 0,5 %)

Output : relay 10Has

Requirements approx.nementales : Temperature : -10 ℃ to 60 ℃, Moisture : 20 % to 85 %

Consumption electric : current static ≤ 35 my, current of start ≤ 65 my

Weight: 33 g / 1,2 oz

Installation

The controller is Easy to install thanks to a wiring simple. It can be mounted directly or integrated in a panel of equipment of control industrial, offering thus a large flexibility of use.

Use

For use the controller, connect-the to l'Power Supply and to the load according to the schema of wiring provided. After the power supply, the red color indicates the measured of the temperature. For adjust the temperature, press on the button Set, then use the button STC and C/F for naviguer in the settings. The controller disconnect automatically the relay depending on the temperature predefinie.

Other Information

The tube digital indicates the condition of the relay : a light off means that the relay is disconnect, while that a light on indicates that it is closed.

The codes P0 to P8 allow of adjust various settings as needed specific of the user.

For changes between Celsius and Fahrenheit, use the button C/F.