Cool to wood 1/4 handle cool hole of lock T-slot cool shape cutter (3 sets of cool hole of lock 1/4 handle black)

Dimensions. For drills to sleeves 5/16 (8 mm) with drill on foot. Length diameter of cut : 8 / 9,5 / 12,7 mm.

Material. This product uses the carbide YG6, with a aretes bright, a hardness high, a positioning precise, a cutting in softness and a resistance to the impacts.

Rural. The knives to sleeves 1/4 suitable for panels of wood solid, MDF, panels of particles, profil design, for of the cuts fine and smooth and the production of furniture tons. They fit also for cool of the slots in of the frame,

of the panels, of the clock, of the hanger and other tools wall-mounted for eml of the hanger in hole of lock or for eml of the dry-laundry of cables.

Features. Blade in carbide, high quality of welding, quality stable, high efficiency, no need to itself worry of the breakage and of the inclinaison when of the work. The blade is sharp and durable, and the design curved is practical for the

disassembly and a more wide efficiency of poinconnage.

Content of packaging : 1 x for 1/2" hexagonal ; 1 x for 3/8" hexagonal ; 1 tool for groove in T for 5/16" hexagonal.

Features :

Edge in carbide. (carbide YG6X)

The incision is clean, the rotation is soft and the resistance to the torsion is strong.

The rod of setting to the ground of precision can be fixed of way stable in the lamp.

Rotation soft, good resistance to the wear and long service life.

The coating of the body of milling allows a better better of the chips and a reduction of the friction.

Guide installation :

It is important use a size of housing normally. Tool must be completely insert in the housing and tight. Applications a force of tightening and insert-the partiellement in the housing during the cut, otherwise the door-tool will damaged.

For the work professional of the wood, it can be used on different types of wood : wood soft and during average, MDF, plastic, contreplaque.

Note :

1. The temperature of material is very high after a operation to long term and same of the smoke will emitted. Especially always that the refrigerant must be fill during the operation.

2. Replace equipment by of contournement tools for prevent damage the tools of cutting or of you injure with of the products in wood knives.

3. Please use tool for select a blade more wide that the piece.

4. Always of the glasses of safety when of use.