Copper Hall Effect Water Sensor G1/2, Switch

[ACCURATE MEASUREMENT] This flow meter provides reliable and accurate data with a starting range of just 1.5 L per minute and a full range of 1 to 30 L per minute. With an insulation resistance greater than 100 MΩ and an electrical resistance of 500 V AC 50 Hz, it ensures safe operation. The 35 cm wire length and 60 mm switch length offer convenient placement for efficient water control. [PREMIUM COPPER CONSTRUCTION] Made from copper, this water sensor switch is built to last. Its robust and durable design ensures reliable performance even in demanding applications, making it wear-resistant for long-term use in various water systems. The sturdy copper body provides excellent heat dissipation and ideal mechanical strength for continuous operation. [INTEGRATED HALL EFFECT TECHNOLOGY] Equipped with an advanced Hall effect sensor, this The device emits a precise electrical pulse with each of the rotors. The sensor is fully sealed from the water line, keeping it safe and dry for accurate and consistent pulse signal transmission. This design eliminates the risk of water damage and ensures stable monitoring of flow rates from 1 to 30 liters per minute. [WIDE APPLICABILITY] Perfectly suited for a variety of equipment, including water heaters, water dispensers, water purifiers, vending machines, coffee makers, and other water measurement or control devices. Its maximum water pressure of 1.75 MPa and operating voltage range of DC 4.5-18 V make it versatile for residential, commercial, and industrial uses, ensuring reliable performance in various settings. [EASY THREE-WIRE CONNECTION] Simple to install with a standard three-wire configuration: red for positive, black for negative, and yellow for the pulse signal. The lightweight and compact size of The G1/2 inch copper switch fits easily into tight spaces, while the low water pressure start capability allows for smooth operation even in low conditions, making it user-friendly for installations.