Copper Tube Bender, Tube Bender Tool, Tube Bending Tools for 1/4 Inch Diameter Tubes, Manual Level Tube Bender for Copper Tubes

1. Machine polishing enhances the pipe bender's appearance and improves the flexibility of its body. 2. The tube groove and the inner groove of the sliding rod are precision-ground using CNC machine tools. The pipe bends smoothly without damaging or undermining it. 3. The lever body is made of a special, durable, and practical pure metal with high tensile strength, easily bending stainless steel. 4. The outer edge of the pipe groove is thickened, providing better resistance to the longitudinal expansion force caused by pipe bending. 5. The convex design allows the user to clearly see the scale in various environments without any issues. Specifications: Item Type: Tube Bender Model: CM-364-04 Material: Cast Iron Purpose: Specially used for bending 1/4 inch pipes with a 9/16 inch radius (approximately 14.2 mm / 0.6 in) Tube Diameter Range: Approximately 6.35 mm / 0.3 in Bending Diameter Range: 1/4 inch Bending Specifications: Approximately 6.35 mm / 0.3 in Bending Angle: ≥ 180° Bending Radius: Approximately 14.2 mm / 0.6 in Maximum Bending Force: 25 kN Instructions: 1. Hold the forming handle of the tube bender or clamp the tube bender in a vise. 2. Loosen the hook and lift the sliding handle. 3. Place the pipe in the groove of the forming disc and secure it in the forming disc with the hook. 4. Lower the sliding handle until the 0 scale line on the hook is aligned with the 0° position on the forming plate. 5. Rotate the slider handle around the forming disc until the 0 scale line on the slider is aligned with the degree