Cordless paint sprayer compatible with Ryobi 18V battery, electric paint sprayer with 4 nozzles and 3 spray patterns, 1000ml container

[Compatible Battery] -- The paint sprayer is compatible with original Ryobi 18V+ lithium batteries such as P102, P103, P104, P105, P107, P108, P109, P190, etc. (batteries not included)

[Improved Motor & Maximum Viscosity] -- Equipped with a brushless motor that can reach up to 42,000 RPM, it effectively reduces noise and saves working time. The viscosity The maximum speed is 80 din/s, with a spray width of 20-30 cm and an air flow of 160 L/min, ensuring perfect spraying results. You can easily control the output volume and paint pattern by adjusting the knob. [3 spray patterns and 4 nozzle sizes] -- The electric spray gun is equipped with 4 nozzle sizes (1 mm, 1.8 mm, 2.5 mm and 3.0 mm) to meet different spraying needs. It can be adjusted to 3 different spray patterns: horizontal, vertical, and circular, making it widely applicable to various scenarios. [Low Voltage Protection & Copper Nozzle] -- The spray gun will automatically stop working when the voltage drops below 15V to extend its lifespan. The copper nozzle performs better than plastic nozzles, effectively preventing damage, being less prone to clogging, and easy to clean. [Wide Application] -- This paint sprayer has a flexible design that allows for easy disassembly without the need for tools. It also comes with a cleaning brush and needle for convenient maintenance. Ideal for indoor and outdoor use, it is suitable for spraying furniture, walls, doors, DIY projects, ceilings, cabinets, and various household painting tasks. [What You Will Get] -- Includes 1 paint sprayer, 1 x 1000ml spray container, 4 nozzles, 1 viscosity cup, 1 nozzle cleaning needle, and 1 cleaning brush. If you have any questions, please contact us through your order. [Usage Notes] -- 1. Before using the electric spray gun, please perform a viscosity test on the paint. Thicker paints may need to be thinned! 2. Do not place the spray gun with the nozzle facing upwards when not in use, to prevent paint from backing up and damaging the motor; during operation, do not release the trigger, as this may cause paint to flow into the machine and damage the motor. This product should not be used vertically upwards; it can be tilted at a 45° angle for upper tasks.