Cosse Batterie 12V/24V, Bornes de Batterie Terminal Positives et Négatives avec 1Paire de Joint de Protection, Connecteurs de Batterie en Laiton de Type SAE/JIS A pour Voiture/Moto/Camion/Navire (2 pa

[Universal Sizes]Suitable for wires with a diameter of 5.2 - 7.4 mm (AWG size 1 - 4) or a cross-section of 16 - 35 mm. Minimum wire size: 16 mm (5/8"). Maximum clip: 9.5 mm/0.37 inch, mini clip: 6.5 mm/0.25 inch.

[Robust & Durable] The pure copper quick-disconnect battery terminals not only have good conductivity and corrosion resistance, but also reduce voltage distortion and transmission loss, and operate 3 times faster than other superior terminals.

[Easy to Use] The battery terminal connectors are easy to identify with positive (red) and negative (black) labels. Comes with 1 hex key and two anti-corrosion washers for easy installation. The wiring is easy to change and the connection is secure. The battery can be connected to the battery terminal by pressing the lever, so no tools are required.

[Battery Terminal] The SAE battery terminal connector has 1 connection terminal for wiring. Specially designed for a Multi-wire connection, primarily used for SAE/JIS TYPE A rear car battery.

[Widely Used] Our battery terminal connectors are suitable for cars, vans, motorhomes, caravans, trucks, marine batteries, etc. Simply ensure you connect the correct terminals with the correct polarity. It has good electrical conductivity and corrosion resistance and works well.