CREA G3/4'' 6-points Turbine Flowmeter Indicator Sensor Gauge Male Thread 1-60l/min

General Description The CREA G3/4" water flow sensor is a practical and compact flow indicator designed for high accuracy and rapid response. It is made from high-quality materials, ensuring durability and wear resistance. This sensor is ideal for applications such as landscape irrigation, plant watering, and traffic control in urban areas. Technical Specifications Interface: 6-pin (G3/4) Inner Diameter: 16 mm Outer Diameter: 26 mm Thread Length: 17 mm Operating Power Supply: DC5-18V Water Flow Range: 2-60 L/min ± 5% Pulse Output Ratio: 50 ± 10% Size: Approx. 3.8 x 6.6 cm Installation Install a filter screen at the sensor inlet to prevent the entry of particles and debris. The sensor must be installed inside the equipment, protected from the elements and prolonged humidity. Avoid environments subject to vibration or shock to maintain measurement accuracy. Do not expose the sensor to nearby magnetic materials, as this may alter its characteristics. Do not disassemble the sensor without authorization to avoid damaging the device. The CREA water flow sensor is designed to measure water flow in various applications, including irrigation and water control. Adherence to the operating conditions is essential to ensure optimal performance. Other information: Do not subject the sensor to severe impacts or corrosive chemicals. The ambient temperature should not exceed 120 degrees Celsius. Wiring: Red + black - yellow signal output, NPN signal.