Cutting disc for metal and stainless steel 100 mm

Cutting and grinding disc for metal and stainless steel

This abrasive disc for angle grinders is designed for routine cutting, grinding and finishing work on metals. It is particularly suitable for working with steel, metal tubes and stainless steel, in domestic, craft or professional settings. Its compact size allows for precise handling, while providing good stability during use. This type of disc is suited to operations requiring a clean cut, effective deburring and a cleaner surface before assembly, welding or finishing.

Thanks to its design dedicated to metalworking, this cutting disc for steel meets the needs of users looking for a reliable accessory for angle grinders. It can be used to cut steel tubes, adjust metal profiles, rework edges, remove irregularities or carry out preparatory polishing depending on the chosen application. Its versatile use makes it a useful consumable in a workshop, on site or for demanding DIY work.

Main advantages

• Suitable for cutting and grinding metal, steel and stainless steel
• Practical size for precision work on steel tube, profile and metal part
• Good manoeuvrability on an angle grinder
• Allows deburring, edge reworking and surface preparation
• Suitable for renovation, maintenance, metalwork and DIY use

Areas of use

This abrasive disc can be used in many situations. It is particularly recommended for cutting metal tubes, touching up steel parts, adjusting structural elements, preparation before welding and light finishing of certain metal surfaces. It fits easily into metalworking, light industrial maintenance, installation, repair and routine upkeep work.

For private individuals, it is a practical solution for garage, workshop or fitting-out work. For professional users, it can be used during work on guardrails, metal frames, ducts, bars, tubes or thin sheets depending on the machine used and the working conditions.

Product characteristics

• Accessory intended for working on ferrous metals and stainless steel
• Compatible with an angle grinder suited to the disc size
• Designed for cutting, rough grinding and finishing operations
• Thin structure promoting precision in cuts
• Light weight for more comfortable handling

Technical parameters

• Product type : cutting and grinding disc for metal
• Application : metal, steel, steel tube, stainless steel
• Length : 10,70 cm
• Width : 10,70 cm
• Thickness or height : 0,12 cm
• Volume : 13,739 cm³
• Weight : 22 g
• Colour : not specified
• Material : technical abrasive for metalworking, exact composition not specified
• Installation : fitting on a compatible angle grinder
• Power supply : depends on the machine used
• Voltage : depends on the grinder used
• Power : depends on the tool used

Installation and usage advice

Before fitting, check the compatibility of the disc with your angle grinder, in particular the diameter accepted by the machine, the fixing system and the maximum permitted rotational speed. Fit the disc in accordance with the tool manufacturer's instructions. Before any use, check the condition of the disc and never use a cracked, deformed or damaged accessory.

To work in good conditions, it is advisable to wear suitable personal protective equipment, such as safety glasses, gloves, hearing protection and, if necessary, a dust mask. Use the disc on a stable material, without forcing the cut, in order to preserve the precision of the work and the service life of the accessory. For stainless steel, make sure to use a clean and suitable disc in order to limit the risk of surface contamination.

Package contents

• 1 cutting and grinding disc for metal

This disc for grinders is an essential accessory for metalwork, whether cutting a steel tube, adjusting a metal part or preparing a stainless steel surface. Its simple design, small size and versatile use meet the expectations of users looking for an effective consumable, clear in its characteristics and suited to routine metal cutting and finishing needs.