Cutting Head Compatible with Stihl FS 55 56 70 94 91 111 131 240 With M10 x 1.0 Thread

Features:

Product Name: 4000W AC Voltage Regulator.

RCS Model: BTA41600B

Dimensions: Length 85mm * Width 55mm * Height 38mm, Button Hole 6mm.

Maximum Power: 4000W (limit power for resistive loads). Power should be reduced for extended periods.

Efficiency: Over 90%

Operating Voltage: 220V AC.

Adjustable Voltage: AC 10-220V.

Note: The load must be connected first, and the voltage can then be adjusted.

SCRs are mainly used for resistive loads (heating wires, incandescent lamps, etc.).

Most single-phase AC motors can also be used, but this is not guaranteed. For other types of loads, please confirm with the buyer. The fuse is not infallible and has a reaction time. If the current is too high, in addition to blowing the fuse, the module may also be damaged. Note that the plastic cover of the connector cannot be fully opened due to the installed casing. The screwdriver must be turned from the side. Also, be careful when opening it. Excessive force can easily break the cover. It may also be crushed during express shipping. This is a consumable part, but it will not affect the module's operation. Our store is not responsible for returns or exchanges for any issues related to the plastic covers. Regulator size: Length 85 mm * Width 55 mm * Height 35 mm. Voltage regulators with a housing and fuse are safer and more convenient to install. They are better suited for homes, factories, and businesses where installation is difficult. Uses an original imported 41A thyristor. Using a 1.6 mm thick, high-temperature resistant FR-4 printed circuit board, the circuit design is well-designed, and the solder path is enlarged and thickened, which is sufficient to handle even high currents, making it safer and more reliable to use. Regardless of cost, the store uses standard 35A 4-position binding terminals. which corresponds to a true 4000W design. (Two inputs and two outputs are more convenient for wiring.) The circuit has undergone numerous technical improvements, and each component has been carefully selected and is now technically perfected. The dual-capacitor design (safety capacitor + metal film capacitor) effectively absorbs overvoltages and voltage spikes, more effectively protects the thyristor, and is more efficient and safer to use. It is constructed of a 1.5mm thick aluminum plate and stainless steel stamping for outdoor use. It is attractive and elegant, and better suited for temperature and speed regulation in homes and industrial settings! Beautiful, safe, practical, and high-quality products are certainly not comparable to ordinary bare-board voltage regulators. There will be no rust or other cosmetic issues, regardless of the duration of use. Note: The data is measured manually; please allow for a 1-3cm error. Due to differences in lighting and screen settings, there may be some color variation; the actual product received will prevail.