Cycle Trigger Delay Timer Switching Circuit, Electronic Relay Module, Delayed Power Off XY LJ02

Features:

1. With the LCD screen, the current mode and settings are clear at a glance, very clear, simple and convenient.
2. Support high and low level trigger, switch control, suitable for most occasions.
3. The wide voltage power supply (6-30V) supports 5.0V micro USB power supply, which is very convenient to use.
4. The switch has a key emergency stop function (STOP key), with reverse connection protection, reverse connection does not burn the circuit.
5. Added sleep mode, after activation, no operation within 5 minutes, automatically turns off the LCD backlight; any key to wake up.
6. Different OP, CL, LOP parameters can be set. These parameters are independent of each other and saved separately; All set parameters are automatically saved after power off.
7.With optocoupler isolation, improved anti-interference capability, and an industrial-grade printed circuit board, the set parameters will always be remembered after power-off.
Specifications:Condition: 100% Brand New
Item Type: Loop Sync Module
Material: Plastic
Color: As Pictures Shown
Size: Approx.Setting the Settings
a) Enter the settings interface by pressing and holding the SET button;
b) First, set the operating mode. The current operating mode will flash as a reminder. To change the operating mode, briefly press the UP/DOWN button;
c) Briefly press the SET button to select the operating mode and enter the system settings;
d) In the system settings interface, briefly press the SET button to change the system setting. Briefly press/long-press the UP/DOWN button to modify it;
(Note: Briefly press SET in P-1-P-3 mode. P-7 mode is not valid.)
e) In the OP/CL settings interface, briefly press STOP to switch.Synchronization unit (1s/0.1s/0.01s/1min)
f) Once all parameter settings are complete, press and hold the SET button to save the parameter settings and exit the settings interface.
Function:
Remote control Data download and parameter setting function:
The system supports UART data download and parameter setting (TTL level);
Additional function:
a) Auto sleep function: In the running interface, press and hold the STOP button.