Dark Grey Set of 12 Corrugated Galvanised Steel Roof Sheet Panels 129 x 45 cm

Product presentation
This set includes 12 dark grey corrugated galvanised steel roof panels. These metal sheets are designed to make or renovate a light covering on different types of outdoor structures. Their corrugated profile promotes rainwater flow and provides a practical solution for protecting a space against bad weather. The compact panel format makes handling, fitting and adapting to many DIY and furnishing projects easy.

Made from galvanised steel, the panels benefit from a surface protection suited to common outdoor use. The dark grey finish blends easily into a residential, professional or agricultural environment. They can be used for a roof, shelter or outdoor cladding, subject to choosing a load-bearing structure and fixings compatible with a metal covering.

Key benefits

• Complete set of 12 corrugated roof panels
• Galvanised steel construction for good resistance to outdoor use
• Sober dark grey colour, easy to match
• Corrugated profile facilitating water evacuation
• Light, easy-to-handle panels simplifying fitting
• Solution suited to renovation work and light constructions

Possible uses
These corrugated sheets can suit roofing a garden shed, storage room, lean-to, garage, workshop, carport or outbuilding. They can also be used for certain outdoor cladding or protection projects of an existing structure. Before buying and fitting, check that the dimensions, roof slope, support type and local rules are suited to your installation.

Product features

• Product type: corrugated metal roof panel
• Composition: galvanised steel
• Colour: dark grey
• Quantity: 12 panels
• Indicated length: 129 cm
• Indicated width: 45 cm
• Indicated thickness: 0.03 cm, i.e. about 0.3 mm
• Indicated weight: 15.5 kg
• Main function: covering and protection against bad weather
• Brand: not specified in the supplied information
• Model: not specified in the supplied information
• Electrical voltage: not applicable
• Power: not applicable
• Capacity: not applicable
• Installation: mechanical fixing on a suitable load-bearing structure

Installation and usage advice
Before fitting, check the condition and alignment of the load-bearing structure. The panels must be installed on a stable support, sufficiently resistant and suited to the load as well as local climate conditions. Provide suitable longitudinal and transversal overlap to limit water infiltration. The overlap depends in particular on the roof slope, wind exposure and applicable construction rules.

Use screws or fixings specially intended for metal coverings, with suitable sealing washers. The fixings must be positioned without excessively crushing the panel. For cutting, use a tool compatible with steel and protect the cut edges with suitable anti-corrosion treatment if necessary. Wear protective gloves when handling, as the metal edges can be sharp. It is recommended to regularly check the covering and fixing points after fitting.

Package contents

• 12 dark grey corrugated galvanised steel roof panels

The screws, washers, sealing accessories and structure elements are not mentioned in the supplied contents. They must be selected separately according to the support, roof configuration and site requirements.