DC 12V Wireless RF Switch 12 Channel Relay RF Wireless Remote Control Transmitter and Receiver
Recommended Price
You may also like
Compare with similar items
Product information
Description
Description:
This 12V 10A relay offers high control power and stable performance. Thanks to its push-button design, a switch can be equipped with several remote controls, or one remote control with several
switches. Its high-quality chip and double-sided circuit board ensure increased durability and compatibility. The wireless signal learning function gives the relay excellent resistance to interference.
Features:
Ideal relay to replace a lost or damaged relay.
Momentary, self-locking, interlocking, 3 commands.
Remote control range: 200 to 500 meters.
A switch can be equipped with several
remote controls, or a remote control with several switches.
This relay is stable, durable and compatible.
Specifications:
Type: 12-channel remote control
Output current: 20A
Static operating current: ≤6mA
Output voltage: 125V AC / 14V DC
Operating voltage:
12V
Battery type: 1 x 23A/12V battery (not included)
Operating frequency: 315MHz 433MHz
Remote control range: approximately 200-500m
Operating temperature: 40°C
at +80°C
Reception sensitivity: ≥105 dBm
Operating modes: Momentary, Self-locking, Interlocking
Relay dimensions: approximately 10 x 8 x 2.5 cm
Remote control dimensions:
about 12 x 5 x 1.5 cm / 4.72 x 1.96 x 0.59 inch
Weight: 243g
Operating mode:
Momentary: Press each button on the switch to connect the corresponding relay. Release the switch to close the corresponding relay. You can only connect one relay at a time.
Lock
: Press each button of the switch to connect the corresponding relay. Then press the other button to connect the corresponding relay. The other relay is closed. You can only connect one relay at a time.
Self-locking
: The same button controls a relay. One pressure opens, another closes. Two independent controls.
Operating mode and switching instructions:
Momentary: Press button “3” on the switch to activate all 12 relays. Press button “1” on the switch to open the corresponding relay A1.
Release it to close relay A1. All relays are compatible with this operating mode.
Lock: Press button “6” on the switch to lock all 12 relays. Press the “1” button
of the switch to open and hold the corresponding A1 relay, then press button “2” to close the other 11 relays. Relay A2 opens and holds, operating successively.
Automatic lock: Press
Press button “9” on the switch to lock all 12 relays. Press the "1" button on the switch to open and hold the corresponding A1 relay, then press the "1" button again to
close relay A1. This operation is independent of the other buttons. All 11 relays work in this way.
Learning: Press the learning button on the receiver. Press the switch button to activate
learning after the sound signal. Learning is successful when the receiver receives the beep and the beep sounds.
Clearing: Long press the learning button on the receiver for about 10 seconds
until the sound signal. The recorded information is erased.
Contents:
1 12-channel relay
1 remote control
Features
- BrandOTHERS
- Pcs per pack1
- ColourMulticolour
- Amperage20 A
- Width8 cm
- MaterialPlaster
- Voltage12 V
- Type of electronic componentCard
- ManoMano ReferenceME247328691
- MMID567898786966
- Product codeQD-GB26Y83748
- EAN3798444203169
















