DC 12V Wireless RF Switch 12 Channel Relay RF Wireless Remote Control Transmitter and Receiver

Description: This 12V 10A relay provides high control power and stable performance. Thanks to its push-button design, one switch can be equipped with multiple remote controls, or one remote control with multiple switches. Its high-quality chip and double-sided circuit board ensure increased durability and compatibility. The wireless signal learning function gives the relay excellent resistance to interference. Features: Ideal relay to replace a lost or damaged relay. Momentary, self-locking, interlocking, 3 controls. Remote control range: 200 to 500 meters. A switch can be equipped with several remote controls, or a remote control with several switches. This relay is stable, durable and compatible. Specifications: Type: 12 channel remote control Output current: 20 A Static operating current: ≤ 6 mA Output voltage: 125 V AC / 14 V DC Operating voltage: 12V Battery type: 1 23 A/12 V battery (not included) Operating frequency: 315 MHz 433 MHz Remote control range: approximately 200 to 500 m Operating temperature: 40°C to +80°C Reception sensitivity: ≥105 dBm Operating modes: Momentary, Self-locking, Interlocking Relay dimensions: approximately 10 x 8 x 2.5 cm Remote control dimensions: approx. 12 x 5 x 1.5 cm / 4.72 x 1.96 x 0.59 inches Weight: 243g Operating mode: Momentary: Press each button on the switch to connect the corresponding relay. Release the switch to close the corresponding relay. You can only connect one relay at a time. Lock: Press each button on the switch to connect the corresponding relay. Then press the other button to connect the corresponding relay. The other relay is closed. You can only connect one relay at a time. Self-locking: The same button controls a relay. One pressure opens, another closes. Two independent controls. Operating mode and switching instructions: Momentary: Press button “3” on the switch to activate all 12 relays. Press button “1” on the switch to open the corresponding relay A1. Release it to close relay A1. All relays are compatible with this operating mode. Lock: Press button “6” on the switch to lock all 12 relays. Press button “1” on the switch to open and hold the corresponding A1 relay, then press button “2” to close the other 11 relays. Relay A2 opens and holds, operating successively. Auto-lock: Press button “9” on the switch to lock all 12 relays. Press the "1" button on the switch to open and hold the corresponding A1 relay, then press the "1" button again to close the A1 relay. This operation is independent of the other buttons. All 11 relays work in this way. Learning: Press the learning button on the receiver. Press the switch button to activate learning after the sound signal. Learning is successful when the receiver receives the beep and the beep sounds. Clear: Long press the learning button on the receiver for about 10 seconds until it beeps. The recorded information is erased. Content: 1 12-channel relay 1 remote control