DC-DC Converter Voltage Power Protection Buck Conversion Module 72V to 24V 20A 480W

1. This module is a 72V to 24V DC power converter, used for various buck voltage regulator equipment.
2. When the protected circuit reaches a dangerous value, the built-in protector automatically cuts off the circuit and resumes normal operation when the value returns to the normal range.
3. Using organic silicone encapsulation technology, it is waterproof, dustproof, and shockproof, suitable for various harsh environments.
4. With automatic protection functions such as overcurrent, overvoltage, overheating, short circuits, etc., providing comprehensive circuit protection.
5. Used for surveillance cameras, electric fans, water pumps, motors, LED lights, security systems, audio equipment, industrial electrical equipment, etc.

Specification:

Item Type: DC-DC Converter
Material: Organic Silicone + Aluminum
Model: GYVRM-JD1L722420
Input Voltage Range: 72V (DC60-90V)
Output Voltage: 24V
Rated Output Current: 20A
Output Power: 480W
Protection Level: IP67
Conversion Efficiency: Up to 96%
Operating Temperature: -20°C to +80°C
Installation Line Length: Approx. 13 cm / 5.1 inches

Package List:

1 x Power Converter.

1 x Wiring Diagram

Note:

1. To ensure normal operation of the converter within the input voltage range, the input voltage should not be lower than the minimum or maximum input value limited by the product during use, and the input voltage value should be more than 2V higher than the output voltage value. If there is no 2V difference, the output value will be lower, but this will not damage (affect) the use of the converter. 2. The input current must be greater than or equal to the power required by the output load device (for example, if the load device requires 100W, the input power must be greater than or equal to 100W). When the converter is in use, the load device current must not exceed the maximum current the converter can handle, and the converter should have as much headroom as possible to ensure normal operation and maximum conversion efficiency. 3. The positive and negative terminals of the converter must not be reversed during operation. A reversed connection can damage the converter. It is recommended to add a suitable fuse to the input terminal during operation. 4. The chip operates in light load mode when there is no load, and the output voltage may vary within a certain range.