DC motor speed controller, 220VAC input, 180VDC output, forward and reverse electric regulator, 500W

Features: 1. [Input and Output Voltage] The input of the electric DC speed controller is 220VAC and the output voltage is 180VDC. 2. [Working Process] The electronic DC speed controller is a direct-start DC motor with a miniature speed reducer, and includes a speed sensor and mechatronic components. 3. [Forward/Reverse Connection] The DC motor speed controller can perform forward or reverse rotation by connecting M+ or M-. 4. [Good Mechanical Properties] This DC motor speed controller has good mechanical properties and a wide speed range. 5. [Simple Installation] This DC motor speed controller is simple to install and use for panel screw mounting. Specifications: Item Type: Motor Speed Controller Material: ABS Input: 220VAC Output: 180VDC Appearance Size: Approx. 100 x 60 x 114 mm / 3.9 x 2.4 x 4.5 inches Opening Hole Size: Approx. 81 x 53 mm / 3.2 x 2.1 inches Installation Method: Panel Screw Mounting How to Use: 1. Before use, please set the external speed control to 0 to avoid generating instantaneous high current and damaging the controller. 2. The rear AC terminal indicates the AC input voltage, M+, M- indicate the DC power output to the DC motor, P1, P2 are the emergency stop terminals; when P1, P2 short-circuit, the motor stops running. 3. This product uses a built-in fuse for overcurrent and short-circuit protection. The fuse must be replaced with one of the same specification after it blows. The control panel switch only controls the motor's operation, not its power supply. Package List: 1 x Motor Speed Controller