DC12V Remote Battery Disconnect Switch.

General Description

High-quality remote battery disconnect switch. Designed for easy access to the trigger under the hood from inside the vehicle.

This electromagnetic switch is suitable for most cars, minivans, and agricultural vehicles, providing a convenient solution for remotely disconnecting the battery power.

Technical Specifications

Item Type: Remote Battery Disconnect Switch Material: ABS, Copper.

Silver

Battery Model: CR2016 x 1

Battery Capacity: 75 mAh

Operating Voltage: DC 11-15V

Rated Current: 120 A - 200 A

Starting Current: 200 A - 360 A (less than ten seconds)

Standby Current: 0.005 A

Switch Size: Approx. 45 x 45 x 45 mm / 1.77 x 1.77 x 1.77 inches

Installation

Connect the red wire to the positive terminal of the battery and the black wire to the negative terminal.

The two large terminals of the relay switch constitute the main switch.

with one input line and one output line.

For negative terminal activation control, connect one large terminal to the negative terminal of the battery.

Usage

This remote battery disconnect system allows you to cut power to your car with a remote control, offering a control range of up to 48.78 m.

It is important to disconnect the main power with the remote control when leaving the vehicle to avoid power loss due to excessive power consumption.

Other Information

Standby power consumption: 5 mA. Operating power consumption: approximately 3 W

Includes: 2 remote controls, 1 main power switch, 1 copper terminal, 2 battery clips, 1 copper adapter. The design is disabled by default for safety.