DDS FG-200 Function Signal Generator, Frequency Counter 0.01 Hz - 500 kHz Signal Source Module Sine + Square + Sawtooth Waveform

Description

TRIMEC, we look forward to your visit. Feel free to contact us if you have any questions✨

Features: Compact size, complete functions, simple operation, easy to carry. It can be powered by an AC adapter or a 3.7V lithium battery. With an oscilloscope, it can be used for testing and debugging electronic circuits, frequency characteristics and impulse response testing, and measuring audio amplifiers. Due to the good accuracy and frequency elasticity of the DDS, it is also very suitable for calibrating the oscilloscope's sweep time factor. The square wave output is suitable for oscilloscope attenuators and for adjusting the probe's pulse characteristics. It has a filter (which can be opened and closed) to adapt to the sinusoidal and pulse wave outputs. This functional, designer generator can test many types of waveforms such as: sine waves, square waves, triangle waves, direct sawtooth waves, inverse sawtooth waves, etc. It is specially designed for professional workers. Specifications: Type: without antenna/with antenna (optional) Material: ABS Main technical parameters: 1. Output waveforms: sine wave, square wave, triangle wave, direct sawtooth wave, inverse sawtooth wave, ECG wave, exponential rise, exponential fall, Lorentz pulse, Gaussian pulse, inductive pulses, half-wave, full wave, Schumann resonance, noise wave, etc. 15 types of waveforms. 2. Power Supply: DC 4-9V, DC 5V is recommended when using an adapter; a 3.7V lithium battery is recommended when using a battery. 3. Current: 180mA at 5V. 4. Frequency Range: Sine wave 0.01Hz-500.00kHz (with a further increase in frequency, the output amplitude will decrease); other waveforms 0.01Hz-100.00kHz (but this does not limit the upper limit of the adjustable frequency; if distortion and jitter requirements are not high, the frequency can be further increased). 5. Resolution: 0.01Hz. 6. Sine wave distortion: <1% below 1 kHz, <0.5% above 1 kHz. 7. Output amplitude: Maximum ±10V (PP). 8. Output impedance: 50 ohms. 9. DC offset: Maximum ±10V, with a cutoff function. 10. All configuration parameters can be saved. 11. Filters are available that can be switched on and off, and are well-suited to sine and pulsed outputs. Item size: 140x80x26mm/5.51x3.15x1.02 inches Item weight: 144g/5.07oz Package weight: 245g/8.64oz Package size: 160x125x35mm/6.29x4.92x1.37 inches
Package list: 1*Aux design generator 1*USB power cable 1*BNC clip cable 1*User manual (English)