Dent Puller,3 Pack Car Dent Puller Suction Cup Dent Puller Car Dent Removal Kit Dent Remover Tool and Dent ReKit Handle Lifter for Cars Body,Glass,Screen,Tiles Lifting,Objects Moving

【Perfect Car Dent Repair Kit】The car dent repair kit is an ideal multi-tool, it comes with one large car dent puller (12cm/4.5in) and two small car dent repairers (6cm/2.2in), just use this dent repair kit.【Easy Operation】Firstly, clean the surface and let the paintless dent repair kit dry. Next, heat the dent area and set the car dent repair handle to the disengaged position. Then place the suction cup on the surface and press the air. Finally, quickly pull the double handles up and pull hard on the handles.【High Quality Car Dent Puller Kit】The dent puller kit is made of high quality ABS material and high strength durable natural rubber.Durable natural rubber and strong metal core, the handle is not easy to break and durable, the rubber on the bottom provides strong suction and is seamless, so it will not scratch the paint. The maximum horizontal suction force for repairing large car dents is 110 pounds, and the maximum vertical suction force is 77 pounds.【Widely Used】The car body dent puller can be used to remove car dents. By the way, it is also widely used for lifting glass, steel, furniture, doors and other smooth objects. It can also be used to detach the screen or used as a phone holder for watching videos.【Warm Tips】The car dent puller kit should be used on a clean, smooth, flat, non-porous and dry surface.Make sure the suction is good before lifting and carefully check that the indentation area is larger than the diameter of the suction cup. Before using a car dent remover, pour hot water over the dent. After that, quickly place the dent puller on the car dent, then pull it out horizontally and repeat the operation until the dent is completely repaired.