Desoldering Braid, 1.5m Long Desoldering Braid, 6 Pieces Copper Desoldering Wire (1.5mm x 3m, 2.5mm x 3m, 3.5mm x 3m), Solder for soldering points

High-quality material: 6 types of braided desoldering strands are made of 100% copper wire and fine braid, with widths of 1.0/1.5/2.0/2.5/3.0/3.5 mm. Each strand is 1.5 meters long, making them ideal for everyday use. Easy to use: The desoldering strands provide an easier way to correct errors on small PCBs without damaging the board. They clean small components and are suitable for both resoldering and desoldering. Low-residue design: The No-Clean solder strand braid leaves minimal residue after use. This residue is non-conductive and non-corrosive, eliminating the need for time-consuming cleanup. Operating principle: The residue-free desoldering braid features a special finely woven structure that conducts heat evenly. Thus, the molten solder is quickly drawn up and absorbed to the maximum extent possible onto the copper wire to ensure that the printed circuit board remains clean and functional. Strong absorption capacity of the wick: The desoldering wick is a dedicated repair tool that significantly reduces the time spent reworking/repairing electronics and greatly reduces the risk of thermal damage to the printed circuit board. The precise geometric design of the braid ensures maximum surface tension and solder absorption capacity. The desoldering wick in the solder joint allows for faster heat transfer and solder absorption.