Diagnostic tool 6154 USB WiFi scanner Win7 Win10

Features:1.Suitable for vehicles manufactured after 2000, including new and future models in production.
2.Supports Wi-Fi and USB connectivity, enabling wireless communication between the vehicle and the diagnostic interface.
3.In infrastructure mode, multiple devices with network capabilities can be connected to each other (network subscribers).
4.The estimated remaining time for ECU flashing is displayed.Documents in GFF are displayed in a separate window.
5.The display of measured values ​​is improved.Automatically delete and save the diagnostic protocol after successful transmission.

Specifications:

Item Type: Diagnostic Tool
Material: ABS
System: for Win7, Win10
Power: 8-18V (via vehicle connector)
Output: 5W
PC interface (wired): Hi-speed USB 2.0, 480 Mbit/s or Fast Ethernet, 100 Mbit/s (via LAN module)
PC interface (wireless): WLAN 802.11 ab/b/g/n 2T2R 300 Mbit/s client mode (WPA2 EAP-TLS, WPA2 PSK)
AP mode: (WPA2 PSK)
Function (support):
Point-to-point connection:
With a point-to-point connection via a wireless network, it creates a radio network. Thus adopts the role of a radio access point (Access Point).A direct connection is established between the diagnostic unit and the diagnostic interface.
Configured using the web user interface.
New features in software version 4.13:
– The estimated remaining time for ECU flash operation is displayed.
– The diagnostic protocol includes GFF session interruption, extended measurement values, improved view of ECU communication, diagnostic hardware used, diagnostic hardware connection type, operating system, patches used, and support request submission.
– The display of measured values ​​is improved.
– Documents in GFF are displayed in a separate window.
– A message box will appear at the start of test drive mode.
– GFF patches can be integrated during the diagnostic session.
– Danger message has been changed.
-Stopping the diagnostic session can be interrupted.
-Automatically delete and save the diagnostic protocol after successful transmission.
-Improved hardware PassThru diagnostic selection.
– Service software update has stabilized.
How to use:
1. Find the OBD interface on the car. (Most are on the driver's side, under the dashboard)
2. Insert the diagnostic tool into the diagnostic computer.
3 Turn the ignition switch key to the 0N position. (Car Power Status)
4. Wait for the data download to complete and follow the prompts to see that the test data has been received.
5. Refer to the instructions provided with the diagnostic tool, computer software, or website to translate the error code.Most reports include error codes and names, defined conditions, and possible causes.

Package List:1 x Diagnostic Adapter 1 x Diagnostic Cable 5 x CDs 1 x Tape