1/4
Diamond Drill Bit for Tiles, Porcelain Stoneware, Ceramics, Glass, Granite, Marble and Quartz – Diameters 5, 6, 8, 10, 12 mm
Of which environmental contribution £0.10 including VAT.
Sold by Permu UK
You may also like
Compare with similar items
Product information
Description
General Description
The Lytool diamond tile drill bit set includes 6 bits suitable for efficiently drilling materials such as tile, glass, granite, and marble. This kit includes a 6 mm yellow cemented carbide bit (pre-drilled) and diamond bits of 5 mm, 6 mm, 8 mm, 10 mm, and 12 mm. It is important to note that the yellow drill bit should only be used for pre-drilling and should not be subjected to prolonged use to avoid rapid wear.Technical Specifications
- Included Drill Bits: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm
- Pre-drilled Bit: 6 mm yellow cemented carbide
- Drill Bit Type: Blue diamond with cooling wax
Installation
- First, install the yellow drill bit on the hand drill.
- Tilt the bit at a 45-degree angle and rotate it rapidly across the surface of the material.
- Then replace it with the appropriately sized blue diamond drill bit for drilling.
Use
- Add water during drilling to cool and extend the life of the Drill bits.
- Use the blue diamond drill bit for fast and durable drilling.
Other information
- The diamond drill bit is compatible with many machines, including hand drills, angle grinders, and bench drills.
- The blue diamond core drill bit contains a cooling wax that helps dissipate heat automatically.
Features
- BrandXVX
- Diameter6 mm
- Compatible machineDrill
- Suitable forMineral / stone
- Material to Work OnConcrete
- MaterialDiamond
- Weight500 g
- Pcs per pack1
- Bit typeWick
- Sold as a setNo
- ManoMano ReferenceME211045037
- MMID951832664500
- Product codeXYTW-10658
- EAN6188042106936
Advice from
Drill buying guide
From hammer drills to drill drivers, your choice of drill will come down to the type of tasks you want to complete. For example, a cordless drill is better for driving screws while a corded drill is best suited to drilling. Read on for our tips on picking the right torque, RPM, impact rate, battery and chuck type.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}