Diesel Generator Controller, Generator Engine Controller, Automatic Start/Stop Diesel Engine Controller Module Panel for Diesel and Gasoline Engine Generators

1. Professional Design: The diesel engine controller is designed to automatically start and stop the generator. 2. Applicable: The generator engine controller module panel is suitable for gasoline and diesel generators from grades 1 to 3. 3. Easy to Install: The generator engine controller module panel is designed for front panel mounting. 4. Safety Protection: The generator engine control module panel features built-in generator protection, alarm, and warning. 5. Widely Used: The generator engine controller is mainly used in locations where generators are needed, such as ships, power supply, communication, etc. Specification: Item Type: Generator Engine Controller. Material: High-temperature resistant flame retardant ABS (UL94 V0, 110 C). Weight: Approx. 241g/8.5oz. Size: Approx. 8x8x7cm / 3.1x3.1x2.8in Power Supply: 277 VAC (Ph N) Main Frequency: 50-60 Hz Power System Type: TN or TT AC Generator Voltage: 277 VAC (Ph-N) AC Frequency: 0-100 Hz Measurement Category: CAT 2 DC Power Supply Range: 9-33V DC 4.0-33V DC Simultaneous Crank Current Consumption: 60 mADC typical (auto mode, normal power supply) up to 200 mADC (relay output activated) Total Rated DC Output Current: 10 A AC Total AC Output Current: 10 A AC Current Level at Each Output Terminal: 10 ARMS Operating Temperature Range: -20°C (-4°F) to 70°C (158°F) Storage Temperature Range: -30°C (-22°F) to 80°F (176°F) Maximum humidity: 95% non-condensing. Installation opening size: approx. 68 x 68 mm / 2.68 x 2.68 inches (minimum). Accuracy: Phase voltage: 2% + 1V. Generator frequency: +/-0.5Hz. Purpose: Commonly used in ships, power generation, communications, and any location where generators are required. Package list: 1 x Generator motor controller, 2 x Accessories, 1 x Manual. Note: Please allow for error due to manual measurement.