Diesel Generator Controller, Generator Engine Controller, Automatic Start/Stop Diesel Engine Controller Module Panel for Diesel and Gasoline Engine Generators

1. Professional Design: The diesel engine controller is designed to automatically start and stop the generator.
2. Applicable: The generator engine controller module panel is suitable for grade 1 to 3 gasoline and diesel generators.
3. Easy to Install: The generator engine controller module panel is designed for front panel installation.
4. Safety Protection: The generator engine control module panel has built-in generator protection, alarm, and warning.
5. Widely used: The generator motor controller is mainly used in places where generators are needed, such as ships, power supplies, communications, etc.

Specification:

Item Type: Generator Motor Controller.
Material: High-temperature resistant flame-retardant ABS (UL94 V0, 110°C).
Weight: Approx. 241g/8.5oz
Size: Approx. 8x8x7cm / 3.1x3.1x2.8in
Power Supply: 277 VAC (Ph-N)
Main Frequency: 50-60 Hz
Power System Type: TN or TT
AC Generator Voltage: 277 VAC (Ph-N)
AC Frequency: 0-100 Hz
Measurement Category: CAT 2
DC Supply Range: 9-33V DC, 4.0-33V DC
Crank Current Consumption: Typical 60 mA DC (automatic mode, normal power supply) up to 200 mA DC (relay output activated)
Total DC Output Current Rating: 10 A DC
Total AC Output Level: 10 A AC
Current Level at Each Output Terminal: 10 ARMS
Operating temperature range: -20°C (-4°F) to 70°C (158°F)
Storage temperature range: -30°C (-22°F) to 80°C (176°F)
Maximum humidity: 95% non-condensing.
Installation opening size: approx. 68 x 68 mm / 2.68 x 2.68 inches (minimum)
Accuracy:
Phase Voltage: 2% + 1V
Generator Frequency: +/-0.5Hz
Purpose: It is commonly used in ships, power generation, communications, and places where generators are needed.

Package List:

1 x Generator Motor Controller

2 Accessories

1 Manual

Note:

Please allow for error due to manual measurement.