Diesel Jump Start Cable, 1 Pair of 12V Power Cables for Car Emergency Booster Battery Jump Start Cables Battery Line Jump Starter Cables (4M/2000A).

1. The battery jumper cables are an excellent accessory to have in cars for emergencies. 2. Complete set (one positive cable with 2 clamps and one negative cable with 2 clamps). 3. Color-coded and insulated clamps effectively minimize the risk of accidental short circuits. 4. With a double construction and extra-strong pure copper teeth for a secure connection. 5. Flexible 3 m (9.8 ft) or 4 m (13.1 ft) long cable for easy and convenient connection to two cars. Specification: Features: The battery jumper cables are an excellent accessory to have in cars for emergencies. Complete set (one positive cable with 2 clamps and one negative cable with 2 clamps). Color-coded and insulated clamps effectively minimize the risk of accidental short circuits. With a double construction and extra-strong pure copper teeth for a secure connection. Flexible 3m (9.8ft) or 4m (13.1ft) cable for easy and convenient connection to two cars. Specification: Condition: 100% Brand New Material: Rubber + Brass Wire Color: Black + Red Voltage: 12V Length/Current: 4m/2000A, 3m/1000A (Optional) Package Weight: Approx. 1269-1608g/44.8-56.7oz Operating Procedures: 1. Connect one red (+) clamp end of the cable to the positive terminal of the discharged battery. 2. Connect the other red (+) clamp end of the cable to the positive terminal of the good battery. 3. Connect one black (-) clamp end of the cable to the negative terminal of the battery. 4. Connect the other black clamp end of the cable to the engine block or car body. 5. When starting, complete the operation immediately; allow 10 seconds of cooling time between starts. 6. The cable discharge procedure follows the reverse steps of installation. Package List: 1 * Pair of Battery Jump Leads Notes: 1. Operate strictly according to the operating procedures. 2. Check the voltage markings on both batteries to ensure they are identical. 3. Turn off all vehicle loads, engage gears, apply the parking brake, and start the engine. Smoking is prohibited near the vehicle. 4. If the vehicle battery is frozen, do not attempt to start the engine, as this may cause an explosion. 5. Ensure the battery cable polarity is correct. 6. The vehicle must not come into contact with other vehicles while in operation. 7. The battery will produce explosive gases! Wear a face shield when installing the cable. 8. If the acid inside the battery accidentally leaks and splashes onto your skin or eyes, rinse them immediately with plenty of water and seek medical advice.