Digital display temperature controller, easy installation, isolated power supply thermostat, 110-240V water droplet probe

General Description

The temperature controller is a digital device designed for precise temperature control in various refrigeration and heating environments. It is equipped with a water droplet sensor and an isolated power supply, ensuring stable operation between 110 and 240 V. Easy to install thanks to its DIN rail mounting, it is ideal for novice users.

Technical Specifications

• Item Type: Temperature Controller
• Model: SN093
• Material: PC
• Installation: Standard DIN rail mounting or fixed installation
• Display: 22 x 11 mm 3-bit LED screen
• Power Supply: 100-240 VAC
• Power: 2 W
• Key: Membrane keypad
• Input: Single thermistor (10K) NTC temperature sensor, measuring range -50 °C to 120 °C
• Output: Non-contact unidirectional relay for Cooling output, NC contact for heating output
• Output contact capacity: 5 A for a limited load, 1 A for an inductive load
• Operating temperature: -10 °C to 50 °C
• Setting range: -45 °C to 110 °C
• Return difference: 1 °C to 30 °C
• Delay time: 0 to 300 seconds
• Gap correction: -25 °C to 25 °C

Installation

The controller is designed for easy DIN rail mounting, allowing for quick and uncomplicated installation. Simply follow the normal process to ensure successful installation.

Use

This thermostat allows you to set the control temperature for cooling or heating. It operates in two modes:

• Cooling mode: activates when the temperature exceeds the setpoint plus the hysteresis.
• Heating mode: activates when the temperature is below the setpoint minus the hysteresis.
• The control temperature range extends from -45°C to 110°C, making it suitable for various environments.

Other information

• Package list: 1 x Thermostat, 1 x Manual
• Note: Follow the instructions for proper operation.