Digital Programmable Attenuator Module Accuracy PCB Boards Electronic Component 6G

1、PCB adopts 1.6mm thick double‑sided board, 1.5 oz copper thickness, and full tin spraying process to make sure good passing performance of large and small currents.

2、This product has a large area of heat dissipation, effective heat dissipation, and can run for a longer time.

3、The product is integrally formed without burrs, with smoothly surface and installation.

4、Convenient to use and with good performance, with small size, easy to carry and store.

5、The working frequency is LF‑6GHz, the attenuation adjustment range is 0‑31.75dB, and the attenuation step is 0.25 (dB).

Item Type: Digital Programmable Attenuator

Material; PCB

Working Frequency: LF-6GHz

Attenuation Adjustment Range: 0-31.75dB

Attenuation Step: 0.25 (dB)

Insertion Loss: ≤1.5dB (the high-frequency end insertion loss will be larger)

Standing Waving Ratio: ≤1.4

Attenuation Accuracy: ±0.25dB Maximum

Rated Power: ≤1W

Connector Form: SMA (female, male screw and female hole)

Temperature Range: -10℃～+50℃(operating), -40℃～+70℃(not running)

Input and Output Impedance: 50Ω1 x Digital Programmable Attenuator

1 x USB Cable