1/3
Digital Thermostat Plug with 2 Relays, 220V Probe, Temperature Controller for Heating and Cooling in Terrariums, Reptiles, Incubators, Greenhouses, Hatcheries, and Brewing Systems
Of which environmental contribution £0.01 including VAT.
Sold by LinzGain Sarl and 1 other seller
You may also like
Compare with similar items
Product information
Description
- 【Digital Thermostat】Features a dual relay socket, allowing you to connect both heating and cooling simultaneously. The thermostat with probe is easy to use. Please note that the total power is 1100W/110V, 2200W/220V.
- 【IP68 NTC Probe】Water heater thermostat with stainless steel probe; suitable for brewing tanks or beer pumps, terrariums, greenhouses, and reptile incubators.
- 【Celsius/Fahrenheit Reading】Thermostat temperature range: -50 ~ 120°C; Accuracy: 0.1°C; Storage Temperature: -20 ~ 60 °C
- 【MAX & MIN Values】The buzzer alarm sounds when the temperature exceeds the limit or the terrarium thermostat probe is faulty; Temperature Calibration; Compressor Protection Time Delay
- 【Quick Guide】TS is the target temperature, HD is the heating difference value, CD is the cooling difference value; When the measured temperature is higher than TS + CD, the temperature controller will turn on the cooler until TS is reached; When it is below TS-HD, the thermostat will turn on the heating until it reaches TS
Features
- BrandSNQ
- Height10 mm
- Weight200 g
- MaterialAluminium
- Pcs per pack1
You are here:
'/%3E%3C/svg%3E){kind=small}