Digital Tire Depth Gauge, Caliper Tire Tread Depth Gauge, Metric/Imperial LCD Gauge 0-25 mm, Battery Not Included, for General Motors Motorcycle Van Truck

GENERAL DESCRIPTION: The digital tread depth gauge measures from 0 to 25 mm with an accuracy of 0.01 mm. It features a large LCD screen and allows zeroing in any position, making tests and measurements more precise. It is easy to read and use, with a switchable system between inches and millimeters. This gauge is ideal for measuring tread depth, brake shoe wear, and brake pad wear. TECHNICAL SPECIFICATIONS: Measuring range: 0-25 mm; Accuracy: 0.01 mm; Display: Large LCD screen; Power supply: Manual on/off; Zeroing: In any position; Switching system: Metric/inches; Applications: Tread depth, brake shoe wear. INSTALLATION: To use the gauge, zero it in any position. Place the gauge vertically on the tire surface, insert the measuring rod into the tire tread depth, and read the displayed measurement. USAGE: It is advisable to take several measurements and average them for an accurate reading. Replace your tires when the tread depth is less than 1.6 mm. For rapid wear, replace them if the depth is less than 3 mm, and for even wear due to rain or snow, replace them if the depth is less than 4 mm. OTHER INFORMATION: CAUTION: Keep the gauge clean. Avoid oil on the rod. Remove the battery if not in use for an extended period. The display flashes when the battery is low. If a display error occurs, remove the battery for 30 seconds.