Digital Tire Pressure Gauge, 220PSI Multifunctional Inflation Gun with 24 Accessories, Various Nozzles and Tools for Cars, Motorcycles, and Bicycles

Checking Tire Pressure

Before measuring the pressure with the tire pressure gauge, make sure the reading is 0. Open the tire valve cover, then connect the brass air clamp to the tire valve to measure the pressure.

Note: An error of 0.2 bar is within the normal range and is a common problem with this tool.

Inflating Tires

Connect the pressure gauge to the air compressor, making sure the compressor can be coupled with the 1/4" NPTEU coupler.

Press the tire inflator handle to start inflation until it reaches the pressure you need, release the handle to stop inflation.

Easy Deflation

You can quickly release tire pressure by simply pressing the air release valve (round button) on the car tire inflator gauge.

Easily control tire pressure without worrying about safety incidents caused by overinflated tires.

4 Units of Measurement

Our new tire pressure gauge provides 0-220 PSI, 0-1500 KPA, 0-15 BAR, 0-15 KG/CM², and 4 pressure units. Each unit has a different color, so you can clearly distinguish it, and the pressure indicated by all 4 units is displayed on the same dial, which is very convenient.

High-Quality Materials

Compared to other pressure gauges, the BURNNOVE tire pressure gauge uses high-quality brass air chucks and rubber tubes to ensure a long service life. You can better handle the device, and it can perform better on tires.

Pressure Values Are Clearly Visible Whether measuring, deflating, or adjusting pressure, you can look at the inflation gun's dial for precise operations, and the data is clearly displayed and easy to read. The protective rubber case effectively protects the dial.

Suitable for Many Scenarios The pressure gauge/compressor is a practical combination, suitable for inflating trucks, cars, motorcycles, and bicycles (the corresponding valves are available in the accessories). We also offer valves that allow you to inflate all types of balloons; it's a multi-functional pressure gauge.

 

How to Replace a 1/4" NPTEU Coupler

Step 1: Use a wrench to remove the coupler from the tire pressure gauge.

Step 2: Wrap the sealing tape around the threads of the new coupler. (To prevent air leaks)

Step 3: Tighten the coupler with a wrench and check for leaks. (Recheck that the interface is tight before use)