DIN rail circuit breaker, smart WIFI switch, mobile phone remote control, 3 synchronization modes, for household appliances, 16A

Multiple Functions: Set the device's on/off state in different scenarios and remotely monitor the real-time status of your electrical appliances. Smart Home Life: You can monitor the usage of all your household appliances and remotely control and program them to make life smarter. 3 Timing Modes: Timing mode/Countdown mode/Cycle synchronization. When you leave work, you can set a timer to turn on your air conditioner in advance, or program other equipment. Premium Material: Copper has good conductivity, while the PA66 flame-retardant material offers high-temperature resistance, effectively improving safety during use. Use of safety: Equipped with colored indicator lights, you can check the operating status at a glance. Intelligent protection, easy to use, reliable, supports short-circuit protection, overload protection, etc. Specification: Item Type: DIN rail circuit breaker. Material: Copper, PA66 Application: Smart home control Panel Color: Black Applicable Application: For Tuya Smart. Rated Operating Voltage: 230V AC Control Type: Remote control, manual Number of Poles: 1P+N (N pole through) Control Method: For SigMesh/for ZigBee Rail:DIN35 Size: approx. 82x68x18mm/3.23x2.68x0.71in
Package list: 1 x Din rail circuit breaker
Instructions for use Lighting Description:

1. The LED indicator displays a steady blue light, indicating that the switch is on.
2. The LED indicator is off, indicating that the switch is off or in off-grid mode. (In off-grid mode, the manual switch has no status indicator; please be careful during operation.)
3. The LED indicator flashes slowly in blue, indicating that the product is in pairing mode.

Operating Steps:

1. Connect the wire from the top end of the circuit breaker to the bottom end, ensuring the wiring is correct and the Wi-Fi signal is strong.
2. Turn on Bluetooth and Wi-Fi on your phone, open the app, then press and hold the "Power" button. Wait approximately 5 to 10 seconds; the LED indicator will slowly flash blue.
3. After waiting a moment, a pop-up window will appear. Click the "+" in the upper right corner, then select the "Add Device" button and wait for the device to be recognized.
4. Enter your Wi-Fi account password and click Next while waiting to connect to the network.
5. Connect to the network.