DIN rail circuit breaker, smart WIFI switch, mobile phone remote control, 3 synchronization modes, for household appliances, 32A

The LED indicator displays a steady blue light, indicating that the switch is activated.
2.The LED indicator is off, indicating that the switch is in the off state or in off-network mode. (In offline mode, the manual switch has no status indicator; please operate safely.)
3. The LED indicator will flash slowly in blue, indicating that the product is in pairing mode.
Steps:
1. Connect the wire from the top end of the circuit breaker to the bottom end. Ensure the wiring is correct and the WiFi signal is strong.
2. Turn on Bluetooth and WiFi on your phone, open the app, then press and hold the power button. Wait approximately 5-10 seconds; the LED indicator will flash slowly in blue.
3. After waiting a moment, the pop-up window will appear. Click the + in the upper right corner, then select the Add Device button and wait for the device to be recognized.
4.Enter the Wi-Fi account password and click Next, then wait for the network connection.
5.Connect to the network.

Specification:
Item Type: DIN Rail Circuit Breaker
Material: Copper, PA66
Application: Smart Home Control
Panel Color: Black
Applicable Application: for Smart Lift
Rated Operating Voltage: 230V AC
Control Type: Remote Control, Manual
Number of Poles: 1P+N (N through pole)
Control Method: for SigMesh/for ZigBe
Rail: DIN35
Size: approx.82x68x18mm/3.23x2.68x0.71in

Package List:
1 x DIN rail circuit breaker