DIY Quartz Pendulum Clock Movement Kit Replacement Pendulum Clock Movement Mechanism (0.9" Shaft Length)

Well packaged: comes with a specially designed blister pack and an instruction manual, easy to carry. Pendulum Mechanism: Total rod length 23mm (0.9"), thread length 14.6mm (0.57"); jumping seconds movement for clocks 9-13mm (0.35-0.51in) thick. Center-to-hole dimensions: Hour hand, approximately 68mm/2.7"; Minute hand, approximately 98mm/3.9" long; Second hand, approximately 100mm/3.94". Wide application: Suitable for cross-stitch, three-dimensional embroidery, handcrafted clocks, frameless clocks, etc. Friendly reminder: When installing this clock movement kit, ensure the hour and minute hands are parallel and check the size before purchasing.     Great app: These pendulum clock movements are great tools for DIY designs. Suitable for repairing and replacing damaged clocks: Suitable for cross-stitch, three-dimensional embroidery, handcrafted clocks, frameless clocks, etc. Delicate Work These replacement parts are carefully and delicately crafted so they can be used for a long time. You can make them yourself to create a unique clock. Easy to Use Contains an hour hand, a minute hand, and a second hand. Instructions are printed on the back. 2 Size Options There are 2 different types of pendulum clock mechanisms. The set is convenient to replace and repair. Simple Installation Our stylish clock is extremely easy to set. The time can be set by turning the time setting knob located on the back of the clock movement. Specification: Material: Plastic and Aluminum Total Length of Hour Hand: Approx. 68mm/2.7 inches Total Length of Minute Hand: Approx. 98mm/3.9 inches Occasion: Approx. 100mm/3.94 inches Package included: 1quartz clock movement 1xsecond cap 1minute hand 1hour hand 1plastic gasket 1brass round 1brass nut.