DN15 G1/2 3-way motorized brass ball valve for air conditioning DC12V

Discover our high-quality motorized ball valve, an essential component for water control systems and air conditioning heating/cooling coils. Made of robust brass, this valve ensures exceptional durability and reliability for heavy-duty use. Designed with an integrated actuator that shuts off the water supply when the valve is closed, it offers enhanced safety and energy savings. Its compact size allows for easy and discreet installation, including wall mounting. Thanks to its precise structure and optimal sealing, it guarantees a perfect closure without any risk of leakage.

**Main Features:**

* High-quality brass construction for a long service life.

* Integrated energy-saving actuator (deactivation upon closing).

* Compact design for space-saving installation.

* Perfect sealing thanks to a precise structure.

* Main use: water control systems and air conditioning chillers/heaters.

**Detailed Specifications:**

* **Condition:** 100% New

* **Model:** DN15, 3-wire, 2-way control

* **Valve Body:** Brass

* **Valve Stem:** 304 Stainless Steel

* **Sealing Gasket:** Special Rubber

* **Motor Base:** Die-cast Aluminum

* **Motor Cover:** Flame-retardant engineering ABS plastic

* **Motor:** Hysteresis synchronous motor

* **Supply Voltage:** DC 12V

* **Power Consumption:** ≤ 7.5 VA

* **Rated Body Pressure:** 1.6 MPa

* **Permissible Differential Pressure:** ≤ 0.13 MPa

* **Applicable Media:** Cold Water, Hot Water

* **Media Temperature:** 2℃ - 90℃

* **Ambient Temperature:** 0℃ - 60℃

* **Opening Time:** Approximately 10 seconds

* **Closing Time:** Approximately 5 seconds

* **Connection:** G1/2

* **Weight:** Approximately 517g

* **Dimensions (H x W x D):** Approximately 12 cm x 7 cm x 6.3 cm

* **Diameter:** Approximately 2 cm

**Package Contents:**

* 1 x Motorized Ball Valve

**Installation and Commissioning Information (for information purposes only):**

Professional installation is required. Please disconnect the power supply before any work and carefully follow the instructions. The flow direction must correspond to the arrow on the body. The valve must be positioned above the collection tray. The actuator and body must be installed on a vertical axis (±60°) with a clearance of at least 30 mm above. The system differential pressure must be controlled to within 0.13 MPa. Sufficient maintenance space must be provided. Wiring and grounding compliant with electrical standards are mandatory. Commissioning without water (to verify the operating cycle) and then with water is recommended.