DN20 Brass Water Pressure Reducer – Adjustable Pressure 0.05 to 0.8 MPa – Pressure Gauge Included – For Solar Energy Systems

General Description:

The water pressure reducing valve is made of brass, offering durability and easy installation. It is suitable for both cold and hot water. This pressure regulator stabilizes the water pressure, allowing for easy adjustment via a brass screw located on the top of the regulator. Its piston design and simple internal structure ensure reliable and environmentally friendly operation.

Technical Specifications:

• Material: Brass

• Maximum Load: 16 kg/cm²

• Maximum Dimensions: 0.05 – 0.8 MPa (7.25 – 116 psi)

• Connector Size: DN20

• Inlet Pressure: 1.6 MPa (Max) / 232 PSI

• Weight: 425 g

Compatibility and Accessories:

• 1 pressure gauge included

• 1 brass water pressure reducing valve included

Installation:

During installation, ensure that the water flow direction matches the direction indicated on the valve. The pressure gauge interface is already fitted with a sealing gasket, so there is no need to overtighten during installation. To adjust the pressure, use a hex key to turn the protective cover on top of the valve. The pressure can be set between 0.05 and 0.8 MPa (7.25 to 116 psi). Turn counterclockwise to decrease the pressure and clockwise to increase it. This valve is ideal for applications such as water purifiers, electric water heaters, and solar power systems, helping to prevent problems related to excessive water pressure.