Door and shower wall fixings, 2 m black shower barrier and silicone retention system, self-adhesive rubber shower threshold with overflow protection, waterproof door seal for the floor

Installation Instructions:1. The Italian shower enclosure must be sealed all around with additional sealing adhesive (packaging not included). 2. For better adhesion, you can heat the backing adhesive with a hair dryer. 3. In the corner, we recommend cutting at 45 degrees, then connect the two parts to ensure strength.Height 12 mm/0.47 inch: The height of the bathroom shower barrier is only 12 mm. Compared to; The foldable shower tray seal can prevent water flow at a height > 12 mm, but the low height does not create obstacles to movement and can block the spread of water over a large area. Please clarify your needs before purchasing.< span class="a-list- Article">Wide Use:1. The connection of the kitchen countertop to the edge of the countertop (sink, washbasin, windowsill, bathtub edge) can be used. 2. Can be used on the floor (bathroom floor, shower tray, around the toilet or washing machine, balcony floor). 3. It can be used as a threshold (bedroom door, bathroom door). 4. Can be used to block spaces from 0 to 100 cm. 20 mm (between the countertop (bathtub, floor) and the wall). ?High-quality silicone material? The waterproof shower head is made of food-grade organic silicone, is corrosion-resistant, high-temperature and wear-resistant, and has no special features. It is flexible, can be cut as desired, and its smooth surface is very easy to clean.< /li> ?Service quality? If you are not satisfied after receiving the shower door seal, please feel free to contact us. We will offer you the best solution within 24 hours.

Water retention strips for the countertop. Our water retention strips on the countertop can be used on the edge of the kitchen sink, the edge of the stove, and the edge of the sink. For example, the edge of the bathroom and the windowsill can prevent your clothes and the floor from getting wet, and keep your kitchen and bathroom clean and organized.

Shower floor: The shower barrier can be used on the bathroom floor, the edge of the shower tray, as a threshold, effectively separating dry and moisture.< / p >

Fill the Gap The silicone water barrier can be used to fill gaps, such as between the sink and the wall, between the bathtub and the wall, to prevent water from seeping into the gaps and becoming moldy and difficult to clean.

Corner Decoration Our shower threshold is designed for a right angle, which fits well on the countertop (floor) and wall, can decorate corners and gaps, and achieve the effect of waterproofing.

Warm Tips for Installation

Buy a size that is 5 cm to 10 cm longer than the required length. Clean the floor and dry it before laying.< /li> < span class="a-list-item">If the floor is uneven, fill it with silicone sealant before installation. Use silicone plastic sealant to cover the ends and edges of the shower water barrier. After the installation is completed, it should be kept dry for 24 hours and expanded by 1 to 24 hours. 2 days in fall and winter. Do not fold loosely. It can only be installed in a straight line. Cut off one corner; heat to 45 degrees, then season both sides. 90 degrees.