Door and window weatherstripping, type E, white, 6 m, 2–4 mm gap, soft shock-absorbing foam

Reminder: Measure the gap between doors and windows before purchasing. How to measure the gap? Method 1: Close the doors and windows and measure directly with a ruler if the gap is large. Method 2: If the gap is smaller, you can use a dollar coin for measuring (a coin is about 2 mm thick). Method 3: You can use paper to measure the size of the gap between doors and windows by repeatedly folding it (any paper is suitable, A4 paper, brochures, advertising paper). Fold the paper repeatedly and insert it into the gap, folding it to a suitable size and using a scale to measure whether the thickness of the paper corresponds to the size of the gap between the doors and windows. High-quality material: The foam tape is made of EPDM with high-quality mesh adhesive. The foam sealing strip is soft and durable, offering excellent performance: windproof, waterproof, insect-proof, dustproof, shockproof, impact-resistant, etc. It's long enough to fit all your doors and windows. Buy it to save money. If you have multiple sealing points, this is your best choice. Multifunctional: This door sealing strip can be used to keep out wind, dust, noise, water, and insects. It protects doors and windows and reduces noise when opening and closing. The porous design effectively reduces noise. It also allows cold air to escape from the room. Humanized design: Numerous market studies have shown that we designed this product to fit the gap between the door and the door frame. Therefore, it performs exceptionally well in this size. Ideal size for doors and windows. Features: The raw material is EPDM foam rubber, which is resistant to oxidation, ozone, and corrosion. The product has a smooth surface, uniform foaming, high quality, and excellent aging resistance. This product is very flexible and quickly returns to its original shape after prolonged torsion. This product is very elastic and quickly returns to its original state after prolonged compression. The mesh-backed adhesive used in this product is highly viscous and evenly distributed. Specifications: Project material: EPDM foam rubber. Product length: 6 m, white E-type door and window sealing strip (9 x 4 mm, sealing gap 2-4 mm). An essential soundproofing strip for home and office. Prevents the penetration of warm and cold air to save energy and reduce your electricity bill. Ensures a quiet and comfortable living environment. The multifunctional door sealing strip can be used to protect against wind, dust, noise, water, and insects. Installation: 1. Mark the same size as the door and cut off the excess adhesive tape at the bottom of the door sealing strip. 2. Clean the bottom of the door. 3. Remove the protective film. 4. Apply weatherproofing materials to the door. Sealing strip installation method. First, clean the surface to be covered to ensure it is clean, smooth, flat, and dry. Measure the height of the door and window and cut the strip to this length with scissors. Peel back a small section of the protective paper, position the sealing strip correctly, and press it firmly into place. Then, try to align it at the top edge. Continuously remove the remaining protective paper from the backing so that the sealing strip runs down the frame and is pressed down continuously. Be careful not to stretch it. Follow the same steps to apply the horizontal sealing strip, paying attention to the seams at the corner joints. There must be no gaps between the joints. Installation instructions: 1. The adhesive surface must be wiped clean. Keep the surface clean, dry, and free of moisture. It must not be rough. After applying the strip, press firmly with your hands; do not pull. The adhesive can be used after 24 hours. 2. The application temperature of the adhesive is 10°C to 35°C. In cold weather, the adhesive is too hard and unsuitable for bonding. At low temperatures, it is recommended to preheat the adhesive with a hairdryer before use. 3. Oily, rusty, easily peeling, rough, dusty, or rain-exposed surfaces are not suitable for the use of adhesive products.