Door and window weatherstripping – White E-strip 6 m, 2–4 mm thick, windproof and anti-collision

Reminder: Measure the gap between doors and windows before buying.

How to measure the gap?

Method 1: Close the doors and windows, and measure directly with a ruler if the gap is large;

Method 2: If the gap is smaller, you can use a dollar coin to measure (a coin is approximately 2 mm thick);

Method 3: You can use paper, folding it repeatedly to measure the size of the gap between the doors and windows (any paper is fine: A4 paper, leaflets, advertising paper). Fold the paper repeatedly and insert it into the gap. Fold it to a suitable size. Use a scale. The thickness of the paper is the size of the gap between the doors and windows.

High-quality material: The foam tape is made of EPDM with a high-quality mesh adhesive. The foam sealing tape is soft and durable, with good cutting performance: windproof, waterproof, insect-proof, dustproof, shockproof, etc.

Long-lasting: It can be applied to all your doors and windows. Buy it to save money. If you have multiple sealing points, this is your best choice.

Multifunctional: This door sealing strip can be used to prevent wind, dust, noise, water, and insects. Protect doors and windows and reduce noise when opening/closing. The porous design effectively reduces noise. You can also direct cold air out of the room.

Humanized design: Extensive market research has shown that we designed this product based on the gap between the door and the door frame.

• Features:
• The raw material is EPDM rubber foam, which is resistant to oxidation, ozone, and corrosion.
• The product has a smooth surface, uniform foam, good quality, and superior resistance to aging.
• This product has high flexibility and can quickly return to its original shape after prolonged twisting.
• This product has high elasticity and can quickly return to its original state after prolonged compression.
• The mesh backing adhesive used in this product is very viscous and evenly distributed.
• Specifications
• Project Material: EPDM foam rubber
• Product Length: 6M White Type E Door and Window Sealing Strip (9*4mm, sealing gap 2-4mm)
• An essential soundproofing tape for homes and offices.
• Prevents hot and cold air to help you save energy and reduce your electricity bills.
• Providing you with a quiet and comfortable living environment
• The multifunctional door sealing strip can be used to prevent wind, dust, noise, water, and insects.
• Installation
• 1. Mark the same size as the door and cut off the excess tape on the bottom of the door sealing strip.
• 2. Clean the bottom of the door.
• 3. Remove the backing film.
• 4. Install weatherproofing materials on the door.
• Sealing Strip Installation Method
• First, clean the surface to be glued to make it clean, smooth, flat, and dry. Measure the height of the door and window and cut the sealing strip with scissors according to this height.
• Remove a small part of the protective paper at On the back, install the sealing strip in the correct position and press it firmly down, then try to align it with the top edge. Continuously remove the protective paper attached to the back so that the sealing strip extends downwards along the frame and is constantly pressed down. Be careful not to stretch it. Follow the same steps to install the horizontal sealing strip, paying attention to the overlap at the corner joints, and ensuring there are no gaps between the joints. Installation Notes: 1. The adhesive surface must be wiped clean, dry, and free of moisture. Ensure the adhesive surface is clean, dry, and smooth. Press firmly with your hands after application; do not pull. The adhesive can be used after 24 hours. 2. The application temperature range for the adhesive is 10°C to 35°C. In cold weather, The adhesive is too hard and unsuitable for bonding. When the temperature is low, it is recommended to use a hairdryer to preheat the adhesive before use. 3. Oily surfaces, rusty surfaces, easily peeling surfaces, rough, dusty surfaces, and environments exposed to rainwater, etc., are not suitable for the use of adhesive products.