Door/window contact sensor – Compatible with siren, alarm control panel and wireless doorbell receiver
You may also like
Compare with similar items
Product information
Description
Item type: Door contact sensor
Power supply: 1 x AAA alkaline battery (included)
Note: Works with our receiver or any other alarm system with 1527 coding; cannot be used independently.
Installation: Peel back the protective film from the double-sided adhesive tape and stick the two parts to the door or window. Align the small triangle, keeping the distance less than 1 cm.
Material: High-quality ABS; Item type: Door contact sensor; Power supply: 1 x AAA alkaline battery (included); Note: Works with our receiver or any other alarm system with 1527 coding; It cannot function independently.
2 Coding Types: KS and 1527
When the coding selector is set to "KS", the door sensor can be used with the receiver in our store.
Upgrading to "1527" makes it compatible with the 1527 coding host alarm system.
4 Steps to Pair the Contact Sensor with the Receiver:
1) Charge the receiver's batteries. If they are not already charged, hold the contact sensor near the magnetic strip.
2) Press and hold the "On/Off/Mode" button on the receiver for 3 seconds to turn it off.
3) Press and hold the "Volume" button for 3 seconds; the receiver will enter learning mode.
4) Separate the two parts of the contact sensor. The indicator on the contact sensor flashes once to signal successful pairing.
Technical Data:
Material: ABS plastic
Battery: 1 x AAA battery (included)
Contact sensor size: 75 x 26 x 17 mm
Magnetic strip size: 40 x 12 x 12 mm
Operating temperature: -10 to 60 °C
Scope of delivery:
1 x contact sensor
1 x magnetic strip
1 x AAA battery
2 x double-sided adhesive strips
1 x mini screwdriver
1 x instruction manual
Features
- BrandNEPTUNE
- Length75 mm
- Width26 mm
- Height17 mm
- MaterialAcrylonitrile butadiene styrene (ABS)



















