Double power automatic transfer switch, two-way non-interrupting controller ZGQ5-100/2P 220 V

1. The silver contacts are used for both static and motion applications, which significantly improve the conductivity and life of the product.
2. There is an integrated hope signal port, normally open, which can be connected to a signal indicator.
3. Made of fireproof plastic, offers good protection, resists high temperatures, safety and reliability.
4. In the event of a power shortage, the emergency power source is activated immediately to guarantee the continuity of the power supply.
5. Small package, easy to transport and carry, convenient to use and with good performance.
Specification:Type of article: Double power automatic transfer switch.
Model: ZGQ5-100/2P
Material: Plastic
Proposal: Switch to the emergency power supply in case of low power and the main power supply when it remains stable.
Working frequency: 50-60 Hz
Nominal voltage: 100 A
Nominal voltage: AC 110-230 V
Nominal voltage: function: CA 220 V
Operation mode: Automatic and manual
ATS: CB level
Conversion time: ≤0.05 (S)
Number of polo shirts: 2P
User instructions:
1. Connect the double power automatic transfer switch to the depuration platform and connect the corresponding power line to the correct sequence of phases. The power and neutral lines must be connected correctly and cannot be connected incorrectly.
2. To clear the three-pole switch, the common and reserved neutral cables must be connected to the neutral terminals (NN and RN) respectively.
3. Configure the dual power automatic transfer switch to operate in automatic rotation and reset mode. If the voltage of other power sources is normal, the switch should be in the common power position and the common power source will be blocked.
4. Configures the common power supply to NA, NB, NC, NN. In the event of a fault, the dual power supply must automatically change to the current supply. If the common power source is normal, you must return to the common power source.
5. Adjusts the voltage of each phase of the common power source to the predetermined voltage value, and the dual power source must change automatically to the responsible power supply. When the power supply returns to normal, the switch will return to normal power supply.

Package List:

1 x Double Power Automatic Transfer Switch

1 x User Manual