Double-sided adhesive tape for rubber sports flooring - 100 mm x 25 meters

This super-strong double-sided adhesive tape has been specially developed for installing our sports flooring on all types of surfaces. The tape is also suitable for bonding carpets, rubber mats, rubber tiles, entrance mats with a rubber backing, etc. The tape has a synthetic rubber adhesive and can be torn by hand. Thanks to its strong adhesion, it will hold well to the underlying surface. The tape also has excellent tensile and shear strength. Installation: Place the mat or tile on a flat surface, underside up. Stick the adhesive tape to all four edges. Stick two pieces of tape in a cross shape, from one corner to the other. For rubber pieces longer than 2 meters, make several crosses side by side to prevent swelling and slippage.
Place the mat in the desired position with the underside facing down, then fold one side back so the tape is visible again.
Remove the protective backing from the tape on the folded side and stick it to the floor. Repeat on the other side.
For optimal adhesion: apply pressure to the mat by walking on it. The mat is now securely fixed and ready for use.
Note: Always ensure the surface is clean, dry, and free of grease for the tape to adhere properly. If the floor contains loose particles (often the case with concrete floors), treat them first with a suitable primer.
Storage Instructions Store the tape in a dry, clean place, away from heat sources and direct sunlight. Under these conditions, unused tape will have a guaranteed shelf life of 12 months.
Roll Length: 25 m Tape Width: 100 mm Double-sided ✔Suitable for: Our range of rubber sports flooring* Carpets, carpet tiles, rubber, rubber tiles, skirting boards, etc.* Although the manufacturer states that the tape is applicable to these materials, we have only tested the tape in combination with our sports flooring. Therefore, we cannot guarantee optimal adhesion to other materials.